Manual Microlife IFR 100 (page 5 of 90) (English, German, Dutch, Danish, Swedish, Norwegian, Finnish)

536869

Zoom out

Zoom in

1/90

5IFR 100 EN

4. Control Displays and Symbols

5. Changing between Forehead and Ear Mode

To change from forehead to ear mode, take off the remov-

able cap 1 from the thermometer tip. The device will

immediately switch to ear mode. The ear icon will be

shown on the display and the «°C» or «°F» icon will flash to

indicate that the device is ready for measurement.

To change back to the forehead mode, place the removable

cap 1 on the thermometer tip and the device will immedi-

ately switch back to forehead mode. The forehead icon will

be shown on the display and the «°C» or «°F» icon will flash

to indicate that the device is ready for measurement.

6. Directions for Use

Forehead measurement

• All segments displayed 6: Press the ON/OFF button

4 to turn on the unit; all segments will be shown for

2 seconds.

• Memory 7: The last reading will automatically be

shown on the display for 2 seconds.

• Ready for measurement 8: When the unit is ready for

measurement, the «°C» or «°F» icon will keep flashing

while the mode icon (ear or forehead) will be displayed.

• Measurement complete 9:

The reading will be shown

on the display

with the «

°C

» or «

°F

» icon and the mode

icon steady. The unit is ready for the next measurement as

soon as the «

°C

» or «

°F

» icon is flashing again.

•

Surface temperature indication

A crossed-ear icon

will appear on the display

when the reading in the ear

mode is outside the range 32.0

∼

42.2 °C (89.6

∼

108.0 °F).

• Low battery indication AK: When the unit is turned on,

the battery icon will keep flashing to remind the user to

replace the battery.

1. Press the ON/OFF button 4. The display 3 is activated

to show all segments for 2 seconds.

The last measurement reading will automatically be

shown on the display for 2 seconds with the «

» icon

When the «

°C

» or «

°F

» icon is flashing, a beep sound is

heard and the thermometer is ready for measurement

Place the probe gently onto the area approximately 1cm

above the center of the eyebrow. If the eyebrow area is

covered with hair, sweat or dirt, please remove the

obstacle beforehand to improve the reading accuracy.

Press the START button once and release it. Start to

move the instrument steadily from 1 cm above the center

of the eyebrow to the temple area. A long beep sound

will emit after 3 seconds to acknowledge the completion

of measurement. If the probe movement is too slow to

reach the temple area before the long beep sound is

heard, repeat the measurement as described above, but

simply move the probe a little quicker this time.

Read the recorded temperature from the LCD display.

)

NOTE:

• Patients and thermometer should stay in steady-

state room condition for at least 30 minutes.

• Don't take a measurement while or immediately after

nursing a baby.

•

Don't use the thermometer in high humidity environments.

• Patients should not drink, eat, or exercise before/while

taking the measurement.

• Before placing the thermometer probe onto the

measurement area, remove dirt, hair, or sweat.

• Don't move the measurement device from the measuring

area before hearing the termination beep.

• Always take the temperature in the same location, since

temperature readings may vary according to location.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Microlife IFR 100 in the language / languages: English, German, Dutch, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 3,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Microlife IFR 100 Manual

Product: