536870
5
Zoom out
Zoom in
Previous page
1/102
Next page
5FR 100 EN
6. Changing between Celsius and Fahrenheit
This thermometer can display temperature measurements in
either Fahrenheit or Celsius. To switch the display between
°C and °F, simply turn OFF the unit,
press and hold
the
START button
2
for 5 seconds; after 5 seconds, the current
measurement scale («
°C
» or «
°F
» icon) will be flashing on the
display
AK
. Change the measurement scale between °C and
°F by pressing the START button
2
. When the measurement
scale has been chosen, wait for 5 seconds and the unit will
automatically enter the «ready for measuring» mode.
3. When the «°C» or «°F» icon is flashing, a beep sound is
heard and the thermometer is ready for measurement 8.
4. Place the probe gently onto the area approximately 1cm
above the center of the eyebrow. If the eyebrow area is
covered with hair, sweat or dirt, please remove the
obstacle beforehand to improve the reading accuracy.
5. Press the START button once and release it. Start to
move the instrument steadily from 1 cm above the center
of the eyebrow to the temple area. A long beep sound
will emit after 3 seconds to acknowledge the completion
of measurement. If the probe movement is too slow to
reach the temple area before the long beep sound is
heard, repeat the measurement as described above, but
simply move the probe a little quicker this time.
6. Read the recorded temperature from the LCD display.
)
NOTE:
Patients and thermometer should stay in steady-
state room condition for at least 30 minutes.
Don't take a measurement while or immediately after
nursing a baby.
Don't use the forehead thermometer in high humidity
environments.
Patients should not drink, eat, or exercise before/while
taking the measurement.
Before placing the thermometer probe onto the
measurement area, remove dirt, hair, or sweat.
Don't move the measurement device from the measuring
area before hearing the termination beep.
Use an alcohol swab to carefully clean the probe and
wait for 15 minutes before taking a measurement on
another patient.
10 short beeps and a red LCD backlight alert the patient
that he/she may have a temperature equal to or higher
than 37.5 °C.
Always take the temperature in the same location, since
temperature readings may vary according to location.
In the following situations it is recommended that three
temperatures in the same area be taken and the highest
one taken as the reading:
1. New born infants in the first 100 days.
2. Children under three years of age with a compromised
immune system and for whom the presence or
absence of fever is critical.
3. When the user is learning how to use the thermometer
for the first time until he/she has familiarized himself/
herself with the instrument and obtains consistent
readings.
4. If the measurement is surprisingly low.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Microlife FR 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Microlife FR 100 in the language / languages: English, German, Dutch, Danish, French, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info