Manual Microlife BP W150 IMT (page 52 of 133) (English)

536847

Zoom out

Zoom in

1/133

Home Menu

•

Center – Select LARGE if your center speaker reproduces

bass frequencies effectively, or select SMALL to send bass

frequencies to the other speakers or subwoofer. If you

didn’t connect a center speaker, choose NO (the center

channel is sent to the other speakers).

•

Surr – Select LARGE if your surround speakers reproduce

bass frequencies effectively. Select SMALL to send bass

frequencies to the other speakers or subwoofer. If you

didn’t connect surround speakers choose NO (the sound of

the surround channels is sent to the other speakers).

•

Surr. Back (VSX-S510 only) – Select the number of

surround back speakers you have (one, two or none). Select

LARGE if your surround back speakers reproduce bass

frequencies effectively. Select SMALL to send bass

frequencies to the other speakers or subwoofer. If you

didn’t connect surround back speakers choose NO.

VSX-S510 only: When using only one surround back

speaker, connect it to the SURROUND BACK L (Single)

terminals.

•

Subwoofer – LFE signals and bass frequencies of

channels set to SMALL are output from the subwoofer

when YES is selected (see notes below). Choose the PLUS

setting if you want the subwoofer to output bass sound

continuously or you want deeper bass (the bass

frequencies that would normally come out the front and

center speakers are also routed to the subwoofer). If you did

not connect a subwoofer choose NO (the bass frequencies

are output from other speakers).

When you’re finished, press

RETURN

You return to the Manual SP Setup menu.

Note

•

If you select SMALL for the front speakers, the subwoofer

will automatically be fixed to YES. Also, the center,

surround, surround back speakers (VSX-S510 only) can’t be

set to LARGE if the front speakers are set to SMALL. In this

case, all bass frequencies are sent to the subwoofer.

•

If the surround speakers are set to NO, the surround back

speakers will automatically be set to NO (VSX-S510 only).

•

If you have a subwoofer and like lots of bass, it may seem

logical to select LARGE for your front speakers and PLUS

for the subwoofer. This may not, however, yield the best

bass results. Depending on the speaker placement of your

room you may actually experience a decrease in the

amount of bass due to low frequency cancellations. In this

case, try changing the position or direction of speakers. If

you can’t get good results, listen to the bass response with

it set to PLUS and YES or the front speakers set to LARGE

and SMALL alternatively and let your ears judge which

sounds best. If you’re having problems, the easiest option

is to route all the bass sounds to the subwoofer by selecting

SMALL for the front speakers.

X.Over

•

Default setting: 100Hz

This setting decides the cutoff between bass sounds playing

back from the speakers selected as LARGE, or the subwoofer,

and bass sounds playing back from those selected as SMALL.

It also decides where the cutoff will be for bass sounds in the

LFE channel.

•

For more on selecting the speaker sizes, see Speaker Setting

on page 51.

Select ‘Manual SP Setup’ from the Home Menu.

Select ‘X.Over’ from the Manual SP Setup menu.

Choose the frequency cutoff point.

Frequencies below the cutoff point will be sent to the

subwoofer (or LARGE speakers).

When you’re finished, press

RETURN

You return to the Manual SP Setup menu.

Channel Level

Using the channel level settings, you can adjust the overall

balance of your speaker system, an important factor when

setting up a home theater system.

CAUTION

•

The test tones used in the Channel Level settings are output

at high volume.

Select ‘Manual SP Setup’ from the Home Menu.

Select ‘Channel Level’ from the Manual SP Setup menu.

Select a setup option.

•

Manual – Move the test tone manually from speaker to

speaker and adjust individual channel levels.

•

Auto – Adjust channel levels as the test tone moves

from speaker to speaker automatically.

Confirm your selected setup option.

The test tones will start after you press

ENTER

. After the

volume increases to the reference level, test tones will be

output.

. Manual SP Setup

Return

. Speaker Setting

. X.Over

. Channel Level

. Speaker Distance

. X.Over

Return

Frequency 100Hz

. Manual SP Setup

Return

. Speaker Setting

. X.Over

. Channel Level

. Speaker Distance

. Channel Level

ENTER:Next

Return

Test Tone Manual

. Channel Level

Please Wait . . .20

Caution

Loud test tones

will be output.

Return

Test Tone [ Manual ]

Really enjoyed this post.Really thank you! Keep writing. makaberzux Submitted on 5-8-2022 at 13:42
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Microlife BP W150 IMT in the language / languages: English as an attachment in your email.

The manual is 4,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Microlife BP W150 IMT

Microlife BP W150 IMT User Manual - English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish - 133 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Microlife BP W150 IMT Manual

Product: