Manual Microlife BP B3 AFIB - 2019 (page 8 of 93) (English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish)

704042

Zoom out

Zoom in

1/93

7. Using a Mains Adapter

You can operate this device using the Microlife mains adapter

(DC 6V, 600 mA).



Only use the

Microlife

mains adapter available as an original

accessory appropriate for your supply voltage.



Ensure that neither the mains adapter nor the cable are

damaged.

1. Plug the adapter cable into the mains adapter socket 6 in the

blood pressure monitor.

2. Plug the adapter plug into the wall socket.

When the mains adapter is connected, no battery current is

consumed.

8. Error Messages

If an error occurs during the measurement, the measurement is

interrupted and an error message, e.g. «Err 3», is displayed.

* Please immediately consult your doctor, if this or any other

problem occurs repeatedly.

9. Safety, Care, Accuracy Test and Disposal



Safety and protection

 Follow instructions for use. This document provides important

product operation and safety information regarding this device.

Please read this document thoroughly before using the device

and keep for future reference.

 This device may only be used for the purposes described in

these instructions. The manufacturer cannot be held liable for

damage caused by incorrect application.



This device comprises sensitive components and must be treated

with caution. Observe the storage and operating conditions

described in the «Technical Specifications» section.

 Protect it from:

- water and moisture

- extreme temperatures

- impact and dropping

- contamination and dust

- direct sunlight

- heat and cold

 The cuffs are sensitive and must be handled with care.

 Do not exchange or use any other kind of cuff or cuff connector

for measuring with this device.

 Only pump up the cuff once fitted.



Do not use this device close to strong electromagnetic fields such

as mobile telephones or radio installations. Keep a minimum

distance of 3.3 m from such devices when using this device.

 Do not use this device if you think it is damaged or notice

anything unusual.

 Never open this device.

 If the device is not going to be used for a prolonged period the

batteries should be removed.

Error Description Potential cause and remedy

Err 1

Signal too

weak

The pulse signals on the cuff are too weak.

Re-position the cuff and repeat the

measurement.*

Err 2

AR-B

Error signal During the measurement, error signals

were detected by the cuff, caused for

instance by movement or muscle tension.

Repeat the measurement, keeping your

arm still.

Err 3

AR-C

Abnormal

cuff

pressure

An adequate pressure cannot be gener-

ated in the cuff. A leak may have occurred.

Check that the cuff is correctly connected

and is not too loose. Replace the batteries

if necessary. Repeat the measurement.

Err 5

» Abnormal

result

The measuring signals are inaccurate and

no result can therefore be displayed. Read

through the checklist for performing reli-

able measurements and then repeat the

measurement.*

Err 6

MAM

Mode There were too many errors during the

measurement in

MAM

mode, making it

impossible to obtain a final result. Read

through the checklist for performing reli-

able measurements and then repeat the

measurement.*

» Pulse or cuff

pressure too

high

The pressure in the cuff is too high (over

299 mmHg) OR the pulse is too high (over

200 beats per minute). Relax for 5 minutes

and repeat the measurement.*

» Pulse too

low

The pulse is too low (less than 40 beats

per minute). Repeat the measurement.*

Error Description Potential cause and remedy

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Microlife BP B3 AFIB - 2019 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Microlife BP B3 AFIB - 2019

Microlife BP B3 AFIB - 2019 User Manual - English, Polish - 94 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Microlife BP B3 AFIB - 2019 Manual

Product: