Manual Microlife BP A100 (page 7 of 81) (English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish)

536796

Zoom out

Zoom in

1/81

5BP A100

8. Using a Mains Adapter

You can operate this instrument using the Microlife mains adapter

(DC 6V, 600mA).



Only use the Microlife mains adapter available as an orig-

inal accessory appropriate for your supply voltage, e.g. the

«Microlife 230V adapter».



Ensure that neither the mains adapter nor the cable are

damaged.

1. Plug the adapter cable into the mains adapter socket 5 in the

blood pressure monitor.

2. Plug the adapter plug into the wall socket.

When the mains adapter is connected, no battery current is consumed.

9. Error Messages

If an error occurs during the measurement, the measurement is

interrupted and an error message, e.g. «ERR 3», is displayed.

* Please consult your doctor, if this or any other problem occurs

repeatedly.



If you think the results are unusual, please read through the

information in «Section 1.» carefully.

10.Safety, Care, Accuracy Test and Disposal

Safety and protection

 This instrument may only be used for the purposes described in

this booklet. The manufacturer cannot be held liable for damage

caused by incorrect application.

 This instrument comprises sensitive components and must be

treated with caution. Observe the storage and operating condi-

tions described in the «Technical Specifications» section!

 Protect it from:

- water and moisture

- extreme temperatures

- impact and dropping

- contamination and dust

- direct sunlight

- heat and cold

 The cuffs are sensitive and must be handled with care.

 Only pump up the cuff once fitted.

 Do not use the instrument close to strong electromagnetic fields

such as mobile telephones or radio installations.

 Do not use the instrument if you think it is damaged or notice

anything unusual.

 Never open the instrument.

 If the instrument is not going to be used for a prolonged period

the batteries should be removed.

 Read the additional safety instructions in the individual sections

of this booklet.

Ensure that children do not use the instrument unsuper-

vised; some parts are small enough to be swallowed.

Instrument care

Clean the instrument only with a soft, dry cloth.

Cleaning the cuff

You can machine wash the cuff cover at 30°C (do not iron!).

WARNING: Under no circumstances, however, may you

wash the inner bladder! Always remove the sensitive

bladder from the sleeve before washing and replace it care-

fully again afterwards.

Error

Description

Potential cause and remedy

ERR 1

» Signal too

weak

The pulse signals on the cuff are too weak.

Re-position the cuff and repeat the

measurement.*

ERR 2

» Error signal During the measurement, error signals were

detected by the cuff, caused for instance by

movement or muscle tension. Repeat the

measurement, keeping your arm still.

ERR 3

» No pressure

in the cuff

An adequate pressure cannot be generated

in the cuff. A leak may have occurred.

Check that the cuff is correctly connected

and is not too loose. Replace the batteries if

necessary. Repeat the measurement.

ERR 5

» Abnormal

result

The measuring signals are inaccurate and

no result can therefore be displayed. Read

through the checklist for performing reliable

measurements and then repeat the

measurement.*

» Pulse or

cuff pres-

sure too

high

The pressure in the cuff is too high (over

300 mmHg) OR the pulse is too high (over

200 beats per minute). Relax for 5 minutes

and repeat the measurement.*

» Pulse too

low

The pulse is too low (less than 40 beats per

minute). Repeat the measurement.*

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Microlife BP A100 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Microlife BP A100 Manual

Product: