14
2. Press C to increase digit; press D to decrease digit. Press and hold C or
D for fast increment/decrement.
3. Press A to set and advance to next setting value.
4. Repeat steps 2 and 3 through setting sequence. Setting sequence is:
hour, minute, second, year, month, date, 12/24-hour format, month/date or
date/month format.
5. Press B to exit setting mode.
6. To set Time Zone 2, press and hold D 3 seconds to change to Time Zone
2. Then use steps 1-5 to set.
NOTE: Weekday is automatically updated upon exiting setting mode.
Recall Mode
1. Press A to change to recall mode.
NOTE: If no data is stored, display will show NO DATA. If data is saved,
display will show the current set (1-9).
2. Press C to toggle through set data: total time, best time, average time,
and each lap (up to 100 laps).
3. Press D to display current set; press D again to scroll to next set.
4. Press and hold D 3 seconds to delete all stored data in the current set.
NOTE: At any point in recall displays, press A to exit and change to
alarm mode.
Alarm Mode
1. Press A to change to alarm mode.
2. Press C to toggle alarm on/off.
3. Press D to toggle alarm 1/alarm 2.