714863
19
Zoom out
Zoom in
Previous page
1/20
Next page
Prodomus
19
If the product operating in abnormal conditions, E0, E1, E2, E3, E4, E5, and E 6
will be displayed and for safety reasons the appliance stopp heating. Refer to
below grid for solution.
error
code
Reason:
Solution:
E0
no adequate cookware
found
Ensure that the cookware is made of ferromagnetic steel (or
bottom suitable for induction cooker), and the diameter of
bottom must larger than 12cm.
E1
Inner temperature sensor
failed
Contact qualified person for repair
E2
sensor for panel failed
Contact qualified person for repair
E3
Overvoltage, the voltage of
power is source over than
270V
Switch off until power source is stable (standard voltage should
be 220 - 240V).
E4
Low voltage, the voltage of
power source lower than
140V
Switch off until power source is stable (standard voltage should
be 220 - 240V).
E5
Panel overheat
stop the product until the product cooled down, then you can
restart it again.
E6
Panel overheat
to cool down the machine, and ensure the air intake or
ventilation port is not blocked. If such issue occur again, contact
qualified person for repair.
Attention: After use and when the cooking or warming process is finished always switch OFF and
unplug the appliance.
Cleaning, maintenance and storing
Caution danger of burning and electric shock! Always switch off and unplug your appliance after
use and before cleaning. Let the appliance cool down before cleaning and storage. Never
immerse the appliance in water or clean it under running water.
Wipe the plates and stainless steel surface with a damp cloth only.
Clean the device after each use to remove food residues.
Wipe off the glass plate and the plastic surfaces with a slightly damp cloth.
Make sure that no water can come into the device.
To avoid any danger or risk of electrical shock, never immerse the device or the cord into water or
any other liquid. Do not put the device and the cord into the dishwasher!
To avoid damaging the surface of the unit never use abrasive cleaners, cleaning pads or any sharp
objects (i.e. metal scouring pads). If using metal objects to clean, the sensitive surface can be
damaged easily by scratches. Always handle the appliance with care and without any force.
Use of additional cleaning liquids is recommended for induction cooking-plates to extend their lifetime.
Do not use any petrol products to clean the device to avoid damaging the plastic parts and the
control panel.
Do not use any flammable acidy or alkaline materials or substances near the device, as this may
reduce the service life of the device and cause deflagration when the device is switched on.
Make sure that the bottom of the cookware does not scrap across the glass field.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mia IKP2210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mia IKP2210 in the language / languages: English, German as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info