159
k
10.2 Remote slave flash mode
The flash unit supports the wireless remote system
in slave flash mode and is compatible with the Sony
system.
At the same time, one or more slave flash units can
be remotely controlled from one master flash unit
on the camera (e.g. mecablitz M400).
A slave flash unit can be assigned to two of three
possible slave groups (RMT, RMT2). The master
flash unit can control all of these slave groups
simultaneously and at the same time take the set-
tings for each slave group into account.
So that multiple remote systems in the same room
do not interfere with one another, there are four
independent remote channels available (CH 1, 2, 3
or 4).
Master and slave flash units belonging to the same
remote system must be set to the same remote
channel.
The slave flash units must be able to receive the
light from the master flash unit with the integrated
sensor for the remote mode .
Depending on the camera model, the camera’s
internal flash unit can also function as master flash
unit.
In slave mode, there is no indication of reach and
no automatic adjustment of the zoom position.
10.2.1 Remote slave flash mode settings
• Switch on the flash unit with the
button. The start screen appears. Thereafter, the
flash unit always switches on with the mode of
operation that was used last.
• Press the button and the drop-down
menu will appear.
• Use the buttons to select the ope-
rating mode.
• Press the
° button and confirm the selected
operating mode.
Remote slave mode is set.
In addition, the selected slave group (e.g. RMT) and
the remote channel (e.g. CH 3) are displayed.
