658313
142
Zoom out
Zoom in
Previous page
1/272
Next page
142
k
Setting the automatic unit switch-off
• Switch on the flash unit with the
button.
The start screen appears. The flash unit always
switches on afterwards with the mode of operati-
on that was used last.
• Press the button and the menu
will appear.
• Use the buttons to select the menu option
.
• Press the
° button and open the menu.
• Use the button to select the menu option
.
• Press the
° button and confirm the selected
setting.
The
button flashes red in stand-by mode.
OPT.
STANDBY
ON
4 OLED displays on the flash unit
4.1 Flash readiness indication
When the flash capacitor on the flash unit is char-
ged, the
button lights up in green, thus indi-
cating that the flash unit is ready.
This means that flash light can be used for the next
shot. Flash readiness is also transmitted to the
camera and indicated accordingly in the camera's
viewfinder.
If a photograph is taken before flash readiness
appears, then the flash unit will not be triggered. If
the camera has already switched to flash sync
speed, the shot may have the wrong exposure (see
13.1).
4.2 Correct exposure indication
With proper exposure, the OK symbol will light up
on the display for about 3 seconds if the recording
in flash modes , pre-flash TTL, ADI flash
metering and automatic mode (see 7.1)
were properly exposed!!
If there is no exposure control indication after the
shot, then the photograph was underexposed.
In that case, you must:
- set the next smaller f-stop (e.g. use f-stop 8 inste-
ad of 11), or
- reduce the distance to the subject or to the reflec-
tion surface (e.g. for indirect flashes), or
- set a higher ISO value on the camera.
Note the maximum flash range indicated on the dis-
play of the flash unit (see 5.2).
TTL
AUTO
OPT.
ZOOM
STANDBY
AF-BEAM
STANDBY
OFF
ON
OK
142


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metz mecablitz M400 - Sony at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metz mecablitz M400 - Sony in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info