Manual Metz MECABLITZ 60 CT-4 (page 41 of 82) (English, German, Dutch, French, Italian, Spanish)

517265

Zoom out

Zoom in

1/82

tic focusing. The autofocus emitter emits a striped pattern that is projected

onto the subject. The camera then uses this pattern for automatic focusing.

• TTL fill-in flash control

Some system cameras offer TTL fill-in flash control in addition to the stan-

dard TTL flash control mode. This operating mode is used for daylight

exposures to brighten up dense shadows and for shots against the light

(contre-jour). The camera’s electronic system, in conjunction with the inter-

nal sensor measurement, ensures that the correct amount of flash light is

emitted to achieve a balanced exposure. The camera automatically per-

forms the flash exposure correction that is necessary for fill-in flash shots.

• TTL flash exposure correction

There are certain photographic situations where the camera’s internal sen-

sor can be deceived. This can be particularly the case with a dark subject

in front of a bright background (the subject is underexposed) or a bright

subject in front of a dark background (the subject is overexposed). To over-

come this problem in such a photographic situation and still achieve a cor-

rect exposure in TTL flash mode, some cameras offer a special flash expo-

sure correction function. While normal exposure corrections by way of

aperture and shutter speed settings, change of film speed or the +/- cor-

rection on the camera will influence all sections of a picture, such special

correction function permits the overall light level to be retained while the

darker shadowy sections are brightened up by flash. Further details on this

mode are given in the respective operating instructions for the adapter and

camera.

1. Safety instructions

•

The flash unit is exclusively intended and approved for photographic use!

• Never fire a flash in the vicinity of flammable gases or liquids (petrol,

solvents, etc.) - DANGER OF EXPLOSION!

• Never take flash shots of car, bus or train drivers, or of motorcycle and

bicycle riders, whilst they are travelling. They could be blinded by the

light and cause an accident!

• Never fire a flash in the immediate vicinity of the eyes! Flash fired direct-

ly in front of the eyes of a person or animal can damage the retina and

lead to severe visual disorders - even blindness!

• Only use the approved power sources listed in the Operating

Instructions!

• Do not expose batteries to excessive heat, sunshine, fire and the like!

• Never throw exhausted batteries on to a fire!

• Exhausted batteries should be immediately removed from the flash unit!

Lye leaking out of spent batteries will damage the unit.

• Never recharge dry-cell batteries!

• Do not expose the flash unit or battery charger to dripping or splashing

water!

• Protect the flash unit from excessive heat and humidity! Do not store the

flash unit in the glove compartment of a car!

• Never place material that is impervious to light in front of, or directly on,

the reflector screen. The reflector screen must be perfectly clean when a

flash is fired. The high energy of the flash light will burn the material or

damage the reflector screen if this is not observed.

• Do not touch the reflector screen after a series of flash shots. Danger of

burns!

• Never disassemble the flashgun! DANGER: HIGH VOLTAGE!

• There are no components inside the flashgun that can be repaired by a

layperson.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metz MECABLITZ 60 CT-4 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metz MECABLITZ 60 CT-4 Manual

Product: