517326
35
Zoom out
Zoom in
Previous page
1/60
Next page
35
ķ
the sensor of the flashgun cuts out the flash too soon with the result that the
actual subject is too dark. With a dark background the flash is cut out too
late so that the actual subject is too bright.
Bright background:
Open the camera aperture by 1/2 to 1 f-stop
(e.g. from f/5.6 to f/4).
Dark background:
Close the aperture by 1/2 to 1 f-stop
(e.g. from f/8 to f/11).
10. Care and Maintenance
Remove dust and grime with a soft dry cloth, or a silicon-treated cloth. Do
not use detergents as these may damage the plastic parts.
Forming the flash capacitor
The flash capacitor incorporated in the flashgun undergoes a physical chan-
ge when the flashgun is not switched on for prolonged periods. For this rea-
son it is necessary to switch on the flashgun for approx. 10 minutes every 3
months. The battery must supply sufficient power to light up the flash-ready
light within one minute after the flashgun was switched on.
11. Technical Data
Guide numbers at ISO 100/21°:
For meter systems: 45; for feet systems: 148
5 auto working apertures at ISO 100/21°:
f/2.8 - f/4 - f/5.6 - f/8 - f/11
Flash durations
:
• approx. 1/300...1/20000 second
• In M mode approx. 1/300 second at full light output
Photosensor measuring angle
: approx. 25°
Colour temperature
: approx. 5600 K
Film speed: ISO 25 to ISO 1000
Synchronization
: Low-voltage thyristor ignition
Number of flashes
:
50*...2000 NiCad battery
100*...2600 with alkaline-manganese batteries
140*...3600 with high-capacity alkaline-manganese batteries
(*with full light output)
Recycling time
:
7 sec. (in M mode)...0.3 with NiCad battery
13 sec. (in M mode)...0.3 sec. with alkaline-manganese batteries
11 sec. (in M mode)...0.3 sec. with high-capacity almn batteries
5 sec. (N 22)/18 sec. (N 23)...0.3 sec.
Swivelling range and locking positions of zoom reflector
:
Upwards: 15° 30° 45° 60° 75° 90°
Anti-clockwise 90° 180°
Clockwise 90° 180°
Dimensions
(w x h x d), approx.
Flashgun 92 x 247 x 102 mm
W
eight
:
Flashgun without power sources: approx. 680 g
Table 1: Guide numbers at maximum light output (Page 59)
Table 2: Chargers (Page 59)
Included:
Flashgun, camera bracket, battery housing 45-39 (only with BAT-version,
otherwise optional extra), synch cable 45-47, wide-angle diffuser 45-41,
Operating Instructions
(additionally with NiCad flashguns: NiCad battery pack 45-40 and battery
charger, see table 2).
703 47 0130.A1 45 CL-1 NC 13.11.2006 14:33 Uhr Seite 35
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metz MECABLITZ 45 CL-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metz MECABLITZ 45 CL-1 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info