517310
49
Zoom out
Zoom in
Previous page
1/78
Next page
fired each time the flashgun is triggered.
The LC display (D) of the mecablitz automatically
shows the flash-to-subject distance required for a
correct exposure. An adaptation to the individual
shooting situation can be achieved by changing the
lens diaphragm or the focal length (on the camera).
The distance will not be indicated in the LC dis-
play if the flash is bounced or if the reflector is til-
ted.
Manual flash mode at 1/16 partial light output
For use of the mecablitz in manual mode at 1/16
partial light output, the operating mode selector
must be set to 1/16 (MANUAL) position. The LC dis-
play (A) indicates ML (Manual Low). A flash at 1/16
of the maximum light output will then be fired each
time the flashgun is triggered.
The LC display (D) of the mecablitz automatically
indicates the flash-to-subject distance required for a
correct exposure. An adaptation to the individual
shooting situation can be achieved by changing the
lens diaphragm or the focal length (on the camera).
(manuale). Ogni volta che si scatta una foto con il flash
verrà emesso sempre un lampo a piena potenza.
Sul display LC (D) del mecablitz viene visualizzata
automaticamente la distanza del flash dal soggetto
necessaria per una corretta esposizione. Modifican-
do l'apertura del diaframma sull'obiettivo o la
distanza focale (sulla fotocamera) è possibile adat-
tare la distanza necessaria dal soggetto alle diverse
situazioni di ripresa.
La distanza non viene visualizzata nel display LC
se l'illuminazione del flash è indiretta o se il rif-
lettore è inclinato in senso orizzontale!
Modo flash manuale con potenza ridotta
(1/16mo)
Per utilizzare il mecablitz con potenza ridotta
(1/16mo) nel modo manuale impostate il selettore
della modalità di funzionamento in posizione
1/16 (MANUAL). Sul display LC (A) viene visualizzato
il simbolo ML (Manuell Low). Ogni volta che si scat-
ta una foto con il flash viene emesso sempre un
lampo a potenza ridotta (1/16mo).
lo irregular con plena potencia de luz.
En el display LC (D) del mecablitz se indica
automáticamente la distancia al objeto de toma
necesaria para una exposición correcta. Si se varía
el diafragma o la distancia focal (Cámara) del objet-
ivo se puede ajustar la distancia necesaria al objeto
de toma a la situación de toma correspondiente.
Con luz indirecta de flash o con el reflector gira-
do no aparece la indicación de distancia en el
display LC!
Funcionamiento manual con potencia parcial de
luz de 1/16
Para el funcionamiento manual del mecablitz con
potencia parcial de luz de 1/16 se conecta el con-
mutador de tipos de funcionamiento a la posición
1/16 (MANUAL). En el display LC (A) se indica ML
(MANUELL LOW). En cada disparo del flash se emite
un destello con 1/16 de la potencia de luz máxima.
En el display LC (D) del mecablitz se indica
automáticamente la distancia al objeto de toma
necesaria para una exposición correcta.
49
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metz MECABLITZ 40 AF-4 Minolta at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metz MECABLITZ 40 AF-4 Minolta in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info