Manual Metz MECABLITZ 36 AF-4 Olympus (page 79 of 140) (English, German, Dutch, French, Italian, Spanish)

517299

Zoom out

Zoom in

1/140

5.5 Zoom reflector

The zoom reflector of the mecablitz has four zoom positions

for optimal light coverage and adaptation of the guide

number to the focal length of the lens.

28 mm Wide-angle illumination for focal lengths

as of 28 mm

35 mm Wide-angle illumination for focal lengths

as of 35 mm

50 mm Normal illumination for focal lengths as of 50 mm

85 mm Telelens illumination for focal lengths as of 85 mm

The zoom reflector can be swivelled upwards into four lock-

ing positions (e.g. for bounce flashes):

30°, 45°, 60° and 90°.

For normal flash operation the reflector is in the horizontal

position: 0°.

5.6 AF measuring beam

The AF measuring beam is activated by the camera electro-

nics when the ambient lighting conditions are insufficient for

automatic focusing. The AF beam emitter then projects a

striped pattern on to the subject, and the camera uses this

pattern to focus automatically.

To enable activation of the AF measuring beam by

the camera, the camera lens must be set to AF. On

the camera, the AF mode “Single-AF” or “ONE-SHOT-

AF” must be selected. Low-speed zoom lenses may

significantly reduce the distance range of the AF mea-

suring beam.

The striped pattern of the AF measuring beam only supports

the camera’s central AF sensor. When using cameras with

several AF metering areas we therefore recommend to acti-

vate the camera’s central AF metering zone.

Some cameras may only activate the AF illuminator inte-

grated in the camera. In such an event, the AF measuring

beam emitter of the mecablitz will not be activated.

Please refer to the corresponding information given in

☞

707 47 0178.A2 36AF-4-CNOPS 05.06.2008 8:29 Uhr Seite 79

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metz MECABLITZ 36 AF-4 Olympus in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metz MECABLITZ 36 AF-4 Olympus Manual

Product: