517294

Metz MECABLITZ 36 AF-3 Canon Manual

82
Zoom out
Zoom in
Previous page
1/144
Next page
FE flash exposure storage
Some Canon cameras offer the possibility of FE flash expo-
sure storage. This is supported by the flash unit in the E-TTL
flash mode.
FE flash exposure storage in E-TTL mode permits the amount
of light required for the subsequent shot to be determined
and stored prior to exposure. This can be expedient when
flash exposure has to be adapted to specific details that
may not necessarily be identical with the main subject.
Focus the camera’s AF sensor metering area on the zone
whose flash exposure is to be predetermined. When the FE
button on the camera is actuated (the designation may vary
with individual camera models - see camera’s operating
instructions) the flash unit will fire an FE test flash. The elec-
tronic measuring circuit inside the camera assesses the
reflected light of the FE test flash to determine the light output
required for the subsequent exposure. The main subject can
thereafter be focused with the AF sensor metering area of
the camera. When the shutter release is pressed the picture
will be exposed with the previously determined light output.
Due to system-inherent reasons any changes in the light
situation after the FE test flash has been fired will not be
taken into account when the picture is shot.
Some cameras do not support FE flash exposure storage in
the “green” full auto mode or programmed image control
modes (see camera’s operating instructions).
5.7.3 Matrix-controlled fill-in flash (Nikon)
Only with mecablitz 36 AF-3 N
In this flash mode the subject and the background lighting
are automatically balanced without overexposing the sub-
ject. The camera establishes the exposure setting for the
ambient light by matrix metering.
This operating mode is either set on the camera or automa-
tically activated by the camera (see operating instructions
for the given camera).
☞
82
ķ
705 47 0076.A2 36 AF3-4 13.07.2006 15:10 Uhr Seite 82
… 82 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metz MECABLITZ 36 AF-3 Canon at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metz MECABLITZ 36 AF-3 Canon in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info