517280
101
Zoom out
Zoom in
Previous page
1/162
Next page
6.1.1 Reactivating the AF measuring beam
• Switch off the flash unit.
• Keep the “MODE” key and the manual firing
button depressed.
• Switch on the flash unit.
• “AF / On” is indicated on the display.
The flash unit’s AF-measuring beam is only
switched on if this function is supported by
the camera.
6.2 Meter-feet changeover (m - ft)
Proceed in the following manner to change
between m / ft:
• Turn off the flash unit by its main switch.
• Keep the “ZOOM” key depressed.
• Turn on the flash unit by its main switch.
• Release the pre-select key.
The display changes from “m” to “ft” or from “ft”
to “m”. The selected unit of measurement is re-
tained after the flash unit has been switched off or
the batteries have been exchanged.
6.3 Resetting the flash unit’s settings
• Switch on the flash unit by its main switch.
• Keep the “MODE” button depressed for about
5 sec.
The following settings are set:
• The AF measuring beam is activated.
• The reflector status is set at 35 mm illumination
without reflector attachment.
• Distance indication is set to “m”.
• The TTL flash mode is activated.
101
ķ
703 47 0173-A2 28 AF-3 25.01.2005 15:53 Uhr Seite 101
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metz MECABLITZ 28 AF-3 Olympus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metz MECABLITZ 28 AF-3 Olympus in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info