Manual Metz Mecablitz 26 AF-2 (page 97 of 164) (English, German, Dutch, French, Italian, Spanish)

673199

Zoom out

Zoom in

1/164

5.4.6 26AF-2 FUJIFILM

The remote slave flash mode is not supported by

FUJIFILM cameras at the time of printing this user guide.

The 26AF-2 automatically switches to the TTL mode of

operation after around 1-2 seconds after pressing the

SLAVE button



When remote slave mode is supported by FUJIFILM

cameras, the 26AF-2 can be used as a slave flash unit

after a software update. Afterwards, wireless remote

control of one or more slave flash units by a master flash

unit (depending on the camera type) on the camera or

by the camera’s master is possible.

For slave flash unit 26AF-2 , slave group A as well as all

remote channels 1, 2, 3 and 4 are always set.

Depending on the camera model, the camera’s internal

flash unit can also function as a master or controller

flash unit. Please consult the respective camera opera-

ting instructions for further tips on setting the master or

controller flash unit.

Remote slave flash mode settings

• Switch on the flash unit with the ON/OFF button



• Press the SLAVE button



on the flash unit to set the

Remote-Slave mode of operation. The setting is imme-

diately effective and automatically saved.

Testing remote flash mode

• Place the slave flash units in the desired positions for

the shot. Use flash unit mounting foot to set up the

slave flash unit.

Assembly / disassembly of the stand

• Press and Locking button



and slide the flash unit,

together with the connection base, into the moun-

ting foot as far as possible.

• Press and Locking button



and remove the flash

unit with the connection base from the mounting

foot.

• Wait for the flash readiness of all connected flash

units. Once the slave flash units have achieved flash

readiness, the STATUS LED



lights up in green.

• Press the manual firing button on the master or

controller flash unit to fire a test flash. The slave flash

units respond with a test flash, if supported by the

camera.

If a slave flash unit does not issue a test flash, correct

the position of the slave flash unit to enable the slave

sensor



to receive the light sent by the master/con-

troller flash unit.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metz Mecablitz 26 AF-2 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metz Mecablitz 26 AF-2 Manual

Product: