673199

Metz Mecablitz 26 AF-2 Manual

93
Zoom out
Zoom in
Previous page
1/164
Next page
93
k
5 Flash modes
Depending on the camera or flash unit type, various TTL
flash modes and the SLAVE flash mode are available.
The video light can be switched on for videos.
The flash mode is set by using the assigned TTL, SLAVE
or LED button.
5.1 TTL operating modes
The TTL flash modes offer a simple method of obtaining
very good flash shots. In TTL flash mode, the exposure is
measured by a sensor in the camera. It measures the
light reflected by the subject through the lens
(TTL = "Through The Lens"). Here the camera automati-
cally determines the flash performance required for a
correct exposure of the shot.
The advantage of the TTL flash mode is that all factors
influencing exposure (e.g. filters, change of aperture
and focal length changes with zoom lens, extensions for
close-ups, etc.) are automatically taken into account in
adjusting the flash light.
If the shot is exposed correctly, the STATUS LED
lights
up in red for approx. 3 seconds (see 4.2).
To define the range of the flash unit, see table
(page 160).
Setting procedure
• Switch on the flash unit with the ON/OFF button
.
• Press the TTL button
on the flash unit to set the TTL
mode of operation
.
• Set a suitable mode of operation on the camera,
e.g. P, S, A .
• Tap the shutter release to transfer data between the
flash unit and the camera.
5.1.1 E TTL- and E TTL II - flash mode (Canon)
E-TTL and E-TTL-II flash modes are digital flash modes.
5.1.2 i-TTL/i-TTL-BL flash mode (Nikon)
The i-TTL flash mode is supported by CLS-compatible
Nikon cameras.
The i-TTL-BL flash mode are only supported by
CLS-compatible cameras if lenses are used that
transmit distance data to the camera
(for example, "D-AF Nikkor lens").
When shooting this data is taken into consideration in
addition in adjusting the flash exposure.
Some cameras do not support the BL function in
combination with SPOT exposure metering! In these
cases, the normal i-TTL flash mode is set.
… 93 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metz Mecablitz 26 AF-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metz Mecablitz 26 AF-2 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info