Manual Metz Mecablitz 26 AF-1 digital (page 98 of 166) (English, German, Dutch, French, Italian, Spanish)

673201

Zoom out

Zoom in

1/166

Testing remote flash mode

• Place the slave flash units in the desired positions for

the shot. Use flash unit mounting foot S60 (optional

accessories) to set up the slave flash unit.

• Wait for the flash readiness of all connected flash

units. Once the slave flash units have achieved flash

readiness, the “STATUS” LED



lights up in green.

• Press the manual firing button on the master or

controller flash unit to fire a test flash. The slave flash

units respond with a test flash, if supported by the

camera.

If a slave flash unit does not issue a test flash, correct

the position of the slave flash unit to enable the slave

sensor



to receive the light sent by the master/con-

troller flash unit.

5.5 Video light

Use the video light to illuminate shots of moving images

at close range.

• Press button



briefly.

The flash unit always switches on afterwards with the

mode of operation that was used last.

• Press the “LED” button



on the flash unit to switch

on the video light. Each time you press the “LED”

button



, the light output switches between “full”

and “half”

If the “LED” button



lights up continuously, you have

set the full light output; if it blinks slowly, the light output

is set to half

If the batteries are almost empty, the video light

switches off and the “LED” button



blinks quickly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metz Mecablitz 26 AF-1 digital in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metz Mecablitz 26 AF-1 digital Manual

Product: