673201
95
Zoom out
Zoom in
Previous page
1/166
Next page
95
k
TTL and ADI metering operating modes are carried out
on the camera (see camera operating instructions).
5.1.7 TTL flash mode with measurement pre-flash
(FUJIFILM)
The TTL flash mode with measuring preflash is a further
development of the standard TTL flash mode of analo-
gue cameras.
5.2 Automatic Fill-in flash mode
The automatic fill-in flash mode is activated by most
cameras when the automatic programme P is selected
and by Vari or subject programmes during daylight
(see camera operating manual).
Fill-in flash mode overcomes troublesome shadows and
produces a more balanced exposure between subject
and background with contre-jour shots. The camera’s
computer-controlled metering system sets the most
suitable combination of shutter speed, aperture and
flash output.
Ensure that the contre-jour light source does not shine
directly into the lens, as this will interfere with the
camera’s TTL metering system!
There is no setting or display for automatic fill-in flash in
the flash unit.
5.3 Manual flash exposure correction in TTL flash mode
This function must be set on the camera, see the camera
user manual.
The auto flash exposure mode of most cameras is
adjusted to a reflection factor of 25% (the average
reflection factor of flash subjects).
A dark background that absorbs much of the light or a
highly reflective bright background (backlit shots,
for example) may result in, respectively, underexposure
or overexposure of the subject.
To offset these effects, the flash exposure can be
adjusted manually for the shot with a correction value.
The extent of the correction depends on the contrast
between the subject and background!
Tip:
Dark subject against light background: positive
correction factor.
Light subject against dark background: negative
correction factor.
Exposure correction by means of alteration of the lens
aperture setting is impossible, since the camera’s
automatic exposure program regards the altered aper-
ture setting as the normal working aperture setting.
When setting the correction factor, the distance shown
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metz Mecablitz 26 AF-1 digital at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metz Mecablitz 26 AF-1 digital in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info