673201

Metz Mecablitz 26 AF-1 digital Manual

92
Zoom out
Zoom in
Previous page
1/166
Next page
92
k
3.3 Switching the flash unit on and off
• Press button
briefly.
The flash unit always switches on afterwards with the
mode of operation that was used last..
• To switch it off, press button
until all LED displays
turn off.
To check the function, press the TTL-button for
(approx. 3sec.). A testflash will be released.
If the flash unit will not be used for an extended period
of time, we recommend that you switch off the flash unit
with the
button and remove the power source
(disposable/rechargeable batteries).
3.4 Standby / Auto OFF for the flash unit
The flash unit is configured so that 10 minutes after -
• being switched on,
• a flash is fired
• the shutter release is actuated
• the camera’s exposure metering system is switched
off. . .
. . . switched to stand-by mode, (Auto-OFF) to save
energy and to protect the power source from
unintentional discharging.
The flash-ready indicator
goes out.
The STATUS LED
flashes red in stand-by mode.
The most recently used operating setting is retained
after automatic shutdown and is immediately restored
when the camera is switched on.
The flash unit can be turned on again by tapping the
shutter release (wake-up function).
The flash unit shuts off completely approx. 1 hour after
last use (AUTO-OFF).
In slave
and Videolicht
the automatic cut-off is not
activated.
The flash unit should always be turned off using the
main switch
Ǽ
if it is not going to be used for an
extended period.
4 LED displays on the flash unit
4.1 Flash readiness indication
When the flash capacitor on the flash unit is charged,
the STATUS-LED
button lights up in green, thus
indicating that the flash unit is ready.
This means that flash light can be used for the next
shot. Flash readiness is also transmitted to the camera
and indicated accordingly in the camera's viewfinder.
… 92 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metz Mecablitz 26 AF-1 digital at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metz Mecablitz 26 AF-1 digital in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info