659296

Mettler-Toledo ViVa Manual

14
Zoom out
Zoom in
Previous page
1/36
Next page
METTLER TOLEDO
VIVA Operation Manual
10
Operations
Weighing and Communication
Place the item to be weighed on the platter, the weight will be displayed.
Remote ASCII commands can control all other functions including data transfer, zero, and tare,
depending on the protocol.
Backlight function
Viva is equipped with a backlight for the display. To switch on the backlight, Press and hold the
“ZERO” key until a longer beep is heard. Use the same procedure to switch the backlight off or just
switch the scale off by the power switch.
Re-zero function
There are two ways to re-zero the scale:
1. Power-up Zero
2. Push button Zero
Power-up Zero
The scale will automatically capture zero when it is turned on. The power-up zero capture range
is +/-10% of the scale capacity. When the scale is turned on with a weight on the platter of
more than +/-10% of the capacity, the scale will not capture zero (the weight display will show
"-----") and the scale will not be ready for use. After removing the weight the scale will capture
"zero".
Pushbutton Zero
The ZERO key re-zeros the scale over a range of +/-2% of the scale capacity. To use this
function, the scale must be in the gross weighing mode (NET cursor must be off) and in a
non-motion condition. When the weight on the platter is more than +/-2% of the scale
capacity, the depression of the zero key will not be accepted.
Tare Function
The Tare key allows you to subtract the weight of items like packaging or wrapping material.
1. Place an empty container or wrapping material on the platter.
2. Press the Tare key.
3. Place the item to be weighed in the container or on the wrapping material and onto the
platter.
Note: A Tare command can be sent from a POS through the Viva’s serial connection. Whatever
method is used to start a transaction must continue to be used until the transaction is over. If the
pushbutton is used first, a remote tare command will not work. Conversely, if a remote tare is used
then the push button will not work until the transaction is complete and the scale has returned to
zero.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mettler-Toledo ViVa at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mettler-Toledo ViVa in the language / languages: English, Spanish as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info