654458

Mettler-Toledo Impact M Compact Scale Manual

121
Zoom out
Zoom in
Previous page
1/138
Next page
Chapter 4: Labels
Label Requirements
4-3
Release Liner
DESCRIPTION: White semi-bleached supercalendered Kraft paper with silicone release
coating
BASIS WEIGHT: 68 ± 3 gram/square meter
THICKNESS: 67 ± 7 µ METER (0.0026 INCH)
Total Thickness (LABEL + ADHESIVE + LINER)
159 ± 17 µ METER (0.0056 to 0.0069 inch)
Light transmission for Gap Sensor Operation
(see optical density definition)
Light transmission at a wavelength of 800 to 900 NM through the liner
ONLY
must be at
least three times the transmission through the liner and label together. This means that
the transmission optical density of the liner must be at least 0.48 less than the that of the
liner and label together
Light transmission at 800 to 900 NM wave length through the liner and label together
must be at least 2% of incident light. This corresponds to an optical density of 1.7.
Label Stripping
Labels must strip from the liner over a temperature range of 2°C (26°F) at 50% RH to
43°C (110°F) at 85% RH.
Finished Label Roll
Requirements
Core and Method of Label Attachment
The label stock must
not
be permanently attached to the cardboard core. The liner must
separate cleanly from the core with 1.0 pound pull tangent to the core as shown in Figure
1. No core material, tape, or adhesive is to remain on the label or liner after separation.
Material, especially hot-melt adhesive, remaining on the label can damage the printhead.
… 121 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mettler-Toledo Impact M Compact Scale at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mettler-Toledo Impact M Compact Scale in the language / languages: English as an attachment in your email.

The manual is 11,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info