659290
41
Zoom out
Zoom in
Previous page
1/74
Next page
Chapter 3: Configuration
Unit Setup
3-19
Network Address
To check the various address specifics of the unit, a user needs simply go to the
Network Address menu. Here they will find a list of the current addresses attached to
the machine and its immediate network(s).
After toggling to NETWORK, press the ENTER key. Use the up/down arrows to toggle
between IP ADDR, SUBNET, GATEWAY, MAC Address, and IDLE TIME. The MAC
address selection is for information only and cannot be changed. Press ESC key to exit
and then ENTER to save the setting.
121BIP ADDRESS
Press ENTER at NETWORK to display the current scale IP address. The IP Address
identifies the client on the network. The IP Address is a unique number consisting of four
parts separated by periods (Ex: 146.207.40.1).
To change the IP Address, press ENTER, and then enter the new IP Address. The IP
address is entered one octet at a time. The default value for this field is
255.255.255.000.
122BSUBNET
The Subnet Mask is used to identify the local network when accessing IP address on the
Ethernet network. The mask is entered one octet at a time. The default value is
255.255.255.000.
123BGATEWAY
Gateway Router IP address is used when accessing devices outside of the local
network. The IP address is entered one octet at a time. The default value is
255.255.255.000.
124BSERVER ADDRESS
Displays and allows for modification of the server’s IP address.
125BMAC
This is the hardware MAC (Media Access Control) address. The MAC address will be
displayed but cannot be changed. It will display 6 sets of 2 numbers that start with
00:E0:7C:xx:xx:xx. The last 6 digits will vary with each scale.
126BIDLE TIME
This is the time (measured in seconds) that the bPro will wait after no communication
before it closes an Ethernet socket connection.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mettler-Toledo bPro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mettler-Toledo bPro in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info