Manual Metronic ZAP4 - 495393 (page 3 of 20) (English, Dutch, French, Italian, Polish, Portuguese, Spanish)

780669

Zoom out

Zoom in

1/20

FOREWORD

Thank you for choosing a universal METRONIC remote. We are condent you will be fully sa-

tised with this product. Models ZAP 2 to 6 enable to manage 2 to 6 appliances: TV, Satellite

receiver (SAT), DVD recorder (DVD) or HIFI system (AUX), DVB-T set top box (TNT), ADSL box

(BOX) according to models. After inserting the 1.5V AAA batteries (not included) in the remote,

you can set up the remote for each appliance that you wish to control. The universal METRONIC

remote has been conceived to control most products of each brand. This is why you have the

choice between 2 types of set ups : by Brand code or by automatic search. In the set up details

below, we use a TV as example. In order to set up the remote for your Satellite receiver or DVD

recorder, replace ‘TV’ with ‘SAT’ or ‘DVD’. After you have set up the remote, simply press the TV,

DVD, SAT etc key to select the appliance you wish to control.

A - Set up by brand code

1 - Switch on your TV.

2 - Look up in the following pages the codes that correspond to the brand of your TV (i.e. for AEG,

you should try the code 0589, then 1423 if the rst code does not work, and nally 0043 if none

of the two rst codes work).

3 - Press the PROG and TV keys together for a few seconds until the light switches on. If you wait

too long before pressing another key, the remote will go into standby and the light will switch

o. You should then start at Step 3.

4 - Enter one of the 4-digit Brand codes. After each digit, the light will briey switch o. It will

switch o for good after you have entered the 4th digit. If the light blinks twice and then stays

on, try the next code.

5 - Point the remote towards your TV and try using the main features (changing channels, ad-

justing sound…)

6 - If the remote does not control the TV properly, try the set up again (from 3) with the next

Brand code. If the remote controls the TV correctly, then the set up is over. If the remote does

not work properly with any code, you should try an automatic search.

B - Automatic Search

1 - Switch on your TV. The automatic search might take a little while (up to 15 minutes).

2 - Press the

PROG

and TV keys together for a few seconds until the light switches on. When you

release the keys the light should stay on.

3 - Press the

PROG

key. The light should start blinking. Press the key until the light switches o

and slowly starts blinking again. This means the automatic search has started. The light should

stay on and blink every time a new code is entered. You should be ready to press the 0 key.

4 - As soon as the TV switches o, press the 0 key. The light should start blinking. Press the TV key.

The light should switch o.Note: You should be quick enough not to exceed 1 second before

the next code from your remote control (a bit less than 1 second between turning TV o and

time to press key «0»).

5 - As your TV is now switched o, switch it on again using the original remote or with the front

keys.

6 - Point the remote towards your TV and try using the main features (changing channels, adjus-

ting sound…). If the remote does not control the TV properly, try the automatic set up again

(from 2). If the remote controls the TV correctly, then the set up is over.

Changing batteries

When the remote starts struggling to control the appliances or if it does not work properly,

you should try changing batteries. Thanks to its memory function, you can change batteries

withouht losing your settings on the remote.

GB | 4 in 1 UNIVERSAL REMOTE CONTROL

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metronic ZAP4 - 495393 in the language / languages: English, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0.95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metronic ZAP4 - 495393 Manual

Product: