495016

Metronic Dualstream BOX - 441360 Manual

13
Zoom out
Zoom in
Previous page
1/36
Next page
20
A - Language selection
If you want to change the language of the menus :
• Press MENU.
• Select the fourth menu and the third sub menu (Installation menu).
• Press 4 key until the language is appropriate to you.
• Press EXIT.
B - TV scart settings
• In the MENU / Installation / System installation, you can adjust the video signal that comes out of
the TV scart.
• On the line Screen format, you must select the size of your TV set : 4:3 or 16:9. Attention, select
16:9 only if you have a widescreen TV. This setting is related to the TV set, not the program you’re
watching.
• On the line Video Output, you can choose between CVBS or RGB. CVBS is universal mode that
works with all TV sets, but RGB gives better picture. If you select RGB, the CVBS output is disabled,
so you can’t use, for example, a video sender on the video cinch (RCA) output.
• On the line TV type, leave AUTO. You can, if you want, force the output to PAL or NTSC if your TV
set has special requirements.
• Press EXIT to exit all the menu.
C - Time settings
• Go to MENU / Time / Time settings, you can adjust the video signal that comes out of the TV
scart.
• On the line Local shift, select the correct value. In UK, GMT in winter time, and GMT +1 in summer
time.
• On the line Time, you can select YES if you want the receiver posts the time on the front panel when
the receiver is in standby. Caution, time is usually updating by analyzing the data sent by channels.
These data being able to be erroneous, we decline any responsibility in the event of inaccuracy of the
hour indicated by the receiver.
This operation resets the memory, including all settings, as the channel list.
Beware, all the modifications you carried out will be lost.
To reset the receiver, do the followings :
• Go to the MENU / Installation / Complete resetting.
• Confirm with OK.
• The receiver ask you the language as the first lighting.
13 - Resetting the receiver
12 - Miscellaneous settings
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metronic Dualstream BOX - 441360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metronic Dualstream BOX - 441360 in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info