How to replace the fuse
Open the fuse compartment with a blade screwdriver and replace the fuse. When replacing the
fuse in the plug, use an ASTA or BSI approved 5 Amp fuse and be sure to re-fit the fuse cover.
If the plug supplied with this equipment has a detachable fuse cover, be sure attach the fuse cover
after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse
cover, please contact an electrical goods retailer. If in doubt, consult a competent electrician how to
replace the fuse.
This symbol means that this unit is double insulated. An earth connection is not required.
CAUTION
To prevent electric shock, disconnect from the mains before removing cover. No user-serviceable parts
inside. Refer servicing to qualified service personnel. Disconnect from the mains supply before cleaning.
Safe use and care of your audio visual equipment
We have designed and made this product to meet European safety standards, but as with any
electrical equipment you must take care to get the longest working life from it and stay safe. Here
are a few tips to help you do this.
Read these instructions carefully before you try to use the equipment.
Protect the mains lead. You must ensure the mains lead cannot be walked on, crushed, chafed, cut,
and so on. The apparatus is not disconnected from the AC power source (mains) as long as it is
connected to the wall outlet, even if the apparatus itself has been turned off. If you are not going to
use the apparatus for a long time, be sure to disconnect the apparatus from the wall outlet.
Avoid harsh conditions such as wet or damp places, high humidity, strong vibration, extremely high
or low temperatures, strong sunlight or places which are dusty. Please avoid the contact of the set
with water or humidity. Do not put into operation near bath, swimming pools.
Never let anyone push objects into holes and ventilation slots on the equipment.
39
38
Information
WARNING
RISK OF ELECTRIC SHOCK
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock of persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Safety Information
Power cord (mains lead)
Do not place the product where a piece of furniture or other heavy object could trap the power cord
(mains lead). Handle the power cord by the plug. Do not pull out the plug by tugging the cord and
never touch the power cord when your hands are wet as this could cause a short circuit or electric
shock. Never make a knot in the cord or tie it with other cords. The power cords should be routed
in such a way that they are not likely to be stepped on. A damaged power cord can cause fire or
give you an electrical shock. Check the power cord periodically to see if it is damaged. If it is
damaged, please ask an approved service agent to replace it.
For your own safety read following instructions carefully before attempting to connect this device to
the mains. This unit is designed to operate on a 220V-240V AC – 50Hz supply only. Connecting it
to other power sources may damage it. Ensure that the supply corresponds to the information on the
rating label on the bottom of the unit. This component system may be fitted with a non-rewireable
plug. If it is necessary to change the fuse in a non-rewireable plug, the fuse cover must be refitted.
If the fuse cover becomes lost or damaged, the plug most not be used until a replacement, available
from the manufacturer, is obtained. It is important that the colour of the replacement fuse cover
corresponds with the colour marking on the base of the plug. If the plug needs to be changed because
it is not suitable for your socket, or it becomes damaged, it should be unplugged then cut off and the
fuse removed immediately. Please dispose of the plug safely and out of reach from children. Under
no circumstance should the cut-off plug be inserted into a mains socket outlet due to high risk of
electric shock. Then fit an appropriate plug carefully following the wiring instructions shown below.
Important
The wires in the mains plug should
be connected as shown in the
diagram. The colours of the wires in
the mains lead of the unit may
not correspond with the coloured
markings identifying the terminals in
your plug. Connect them as follows:
• The wire which is coloured
blue must be connected to the
terminal which is marked with
the letter ‘N’ or coloured black.
• The wire which is coloured
brown must be connected to the
terminal which is marked with
the letter ‘L’ or coloured red.
• There should be no connection to the earth terminal of your plug.
If you use a 13 Amp (BS1363) plug, you will need a 5 Amp fuse.
• The mains plug is the disconnect device and therefore must remain readily operable.
