598217
4
Zoom out
Zoom in
Previous page
1/19
Next page
2
2 MX670 / MX675
1
.2.2 Meaning of symbols used
Symbol Meaning Symbol Meaning
Instrument protected
by double isolation.
Ground.
Alternating current. Battery.
Direct current.
The CE marking
guarantees
conformity with
European
directives and with
regulations
covering EMC.
CAUTION -
DANGER! Refer to
the operating manual.
Caution, risk of
electrical shock
Audible continuity test
Clamp:
Application or
withdrawal authorized
on conductors under
dangerous voltage
Selective sorting
of waste for
recycling electrical
and electronic
equipment within
the European
Union.
In accordance with
the WEEE
2002/96/EC
directive: This
equipment must
not be processed
as household
waste.
1.2.3 When using the instrument
To prevent electrical discharge, injury or damage to the
device, and to ensure you use the multimeter without risk,
follow the safety recommendations
below:
Read the operating instructions fully before using this
device and observe all safety instructions.
This device must be used indoors, up to 2000 m altitude.
Never exceed the protection limit values indicated in the
specifications for each type of measurement.
When the multimeter clamp is inserted into the
measurement circuits, do not touch the unused
measurement cables or terminals.
Before changing the function, disconnect the
measurement leads from the circuit measured.
Never measure resistances on a live circuit. Disconnect
the power and discharge all high voltage condensers
before performing a resistance or continuity
measurement.
Avoid working alone.
Use the device only as specified in this manual;
otherwise, the protection provided by this multimeter may
be altered.
Do not use this device if it appears damaged.
Inspect the integrity of lead insulation. Replace damaged
leads.
Be careful when working with voltages higher than
70 V
DC or 33 Vrms and 46.7 Vpp, such voltages can
pose a risk of electrocution. Depending on conditions, the
use of individual protection is recommended.
Always
keep hands behind the physical protection of the
tips or the clamp during a measurement.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metrix MX 675 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metrix MX 675 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Metrix MX 675

Metrix MX 675 User Manual - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info