598216
7
Zoom out
Zoom in
Previous page
1/19
Next page
MX670 / MX675 25
3 GENERAL DESCRIPTION
3.1 Correction of zero in DC measurement
This function is present only on model MX675 to return to zero
the display
of the
remanent magnetization of the clamp in DC
measurement. When the switch
is positioned on A
DC
and with
no conductor inserted into the clamp, press the A
DC
ZERO &
HOLD key (about 2 seconds) until display a of zero current
appears. This reset to zero is also indicated by an audio beep
and the display
of the
symbol ZERO.
This operation must usually be renewed after each high
amplitude current measurement.
Elimination of zero correction is possible only by changing the
function using the switch.
3.2 HOLD function - Freeze display
In model MX670, it is possible to freeze the value displayed by
pressing the "HOLD" button. To deactivate this function, press
the "HOLD" button a second time.
In model MX675, it is possible to freeze the value displayed by
pressing the A ZERO & HOLD button. To deactivate this
function, press the “A ZERO & HOLD” button a second time.
3.3 Automatic ranges
Depending on the function and nature of the input signals, the
instrument uses automatically the best suited measurement
range. The manual choice of a range is therefore not possible.
3.4 Auto power-off
The clamp will stop automatically after 10 minutes
(The symbol is displayed).
To deactivate this function, hold down the A ZERO & HOLD
button (for MX675) or the HOLD button (for MX670). Activate
the clamp while turning the switch
from the OFF” position
towards any position.
Release the button when the audio signal confirms the
operation (the symbol is no longer displayed).
3.5 PEAK Function (1 ms)
This function is used for measuring 1-ms peak values in
voltage or current.
To activate the function, press the MIN MAX PEAK key for at
least 2 seconds, until "PEAK" is displayed.
To exit this function, press the MIN MAX PEAK key for at
least 2 seconds or press the A ZERO & HOLD button
(MX675) twice or press the HOLD (MX670) button twice; the
clamp returns to normal mode.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metrix MX 670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metrix MX 670 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Metrix MX 670

Metrix MX 670 User Manual - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info