598214
14
Zoom out
Zoom in
Previous page
1/23
Next page
Chapter II
Portable digital multimeter 29
4.2. RA
NGE key
AUTO mode to switch to MANUAL mode (short press).
MANUAL mode, to select the next range (short pr
ess) or return to AUTO mode (long press).
Measurements concerned : v
oltages (except 500 mV range), capacitance, resistance,
current (except 10 A range).
When making time measurement (frequency, duty cycle) : if the range change made
during
prev
ious measurements (Voltage or Current) was in manual mode, it may be necessary to
adapt this measurement range to the signal level injected at the input. This is why the
RANGE key is used to change from one range (Voltage or Current) to the next range. The
new range is then displayed for 2 seconds.
4.3. REL key
Short press : REL mode, the last value measured becomes the reference value derived from
subsequent measurements. In temperature measurement the REL key used to
compensate the connexions resistance (refer to §. 4.1.7.).
Long press : When in REL mode, a long press displays the reference being used. This
value may be adjusted using the SEL/ON key (selection of digits and a
sign) and the RANGE key (increment the selected digit).
4.4. Pk +/- key
The fast positive or negative peak measurement functions ( 1 msec.) can be accessed by
repeatedly pressing this key in the V
DC
, mV
DC
, mA
DC
and 10 A
DC
functions.
4.5. HOLD key
Short press : Fixes the display on the current value.
Long press : Accesses or quits the “autostore” mode. Can be accessed in the V
DC
, mV, V
AC
positions.
Autostore
Set the probes on the point to be measured. An audio signal indicates if the measurement is
stable. When you remove the probes, a second audible signal indicates that this stable value
displayed has been stored.
4.6. ZOOM key
You can press this key to expand the bargraph readout five times for positive measurements and
eleven times for bipolar measurements, one centred around zero (centre zero mode).
Adjusts ohm-value references in dB and audio power measurements.
When the current measurement is dB or audio power, you can display the resistance reference
with the ZOOM key (long press). This value can then be adjusted using the SEL/ON and RANGE
keys. You quit the ohm reference adjustment mode with the ZOOM key (short press).
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metrix MX 59HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metrix MX 59HD in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Metrix MX 59HD

Metrix MX 59HD User Manual - German - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info