776315

Metrel MI 3288 - EI Tester Manual

150
Zoom out
Zoom in
Previous page
1/155
Next page
MI 3288 EI Tester Appendix D – Programming of Auto Sequences®…
150
D.3.3 Flow commands
Flow commands are used to control the flow of measurements. Refer to chapter D.5 Description
of flow commands for more information.
D.3.4 Number of measurement steps
Often the same measurement step has to be performed on multiple points on the device under
test. It is possible to set how many times a Measurement step will be repeated. All carried out
individual Single test results are stored in the Auto Sequence® result as if they were
programmed as independent measuring steps.
D.4 Creating / modifying an Auto Sequence®
If creating a new Auto Sequence® from scratch, the first step (Header) and the last step
(Result) are offered by default. Measurement steps are inserted by the user.
Options:
Adding a measurement
step
By double clicking on a Single test a new measurement step
will appear as the last of measurement steps. It can also be
dragged and dropped on the appropriate position in the Auto
Sequence®.
Adding flow commands
Selected flow command can be dragged from the list of Flow
commands and dropped on the appropriate place in any Auto
Sequence® step.
Changing position of flow
command inside one step
By a click on an element and use of keys.
Viewing / changing
parameters of flow
commands or single tests.
By a double click on the element.
Setting number of
measurement steps
By setting a number in the field.
Right click on the selected measurement step / flow command
Copy – Paste before
A measurement step / flow command can be copied and
pasted above selected location on the same or on another Auto
Sequence®.
Copy – Paste after
A measurement step / flow command can be copied and
pasted under selected location on the same or on another Auto
Sequence®.
Delete
Deletes the selected measurement step / flow command.
… 150 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metrel MI 3288 - EI Tester at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metrel MI 3288 - EI Tester in the language / languages: English as an attachment in your email.

The manual is 5.13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info