776244
10
Zoom out
Zoom in
Previous page
1/242
Next page
MI 3155 EurotestXD General description
9
The instrument comes supplied with rechargeable Li-Ion battery pack. The battery
pack should only be replaced with the same type as defined on the battery
compartment label or as described in this manual!
Hazardous voltages exist inside the instrument. Disconnect all test leads, remove
the power supply cable and switch off the instrument before removing battery
/fuse compartment cover.
Do not connect any voltage source on C1 inputs. It is intended only for connection
of current clamps. Maximal input voltage is 3 V!
1.1.2 Markings on the instrument
Read the Instruction manual with special care to safety operation«. The
symbol requires an action!
Do not use the instrument in AC supply systems
with voltages higher than 550 Va.c.!
Mark on your equipment certifies that it meets requirements of all subjected
EU regulations.
This equipment should be recycled as electronic waste.
1.1.3 Warnings related to safety of batteries
Use only batteries and power supply adapter delivered from the manufacturer or
distributer of the test equipment.
Never dispose of the batteries in a fire as it may cause them to explode or generate
a toxic gas.
Do not attempt to disassemble, crush or puncture the batteries in any way.
Do not short circuit or reverse polarity the external contacts on a battery.
Avoid exposing the battery to excessive shock/impacts or vibration.
Do not use a damaged battery.
The Li ion battery contains safety and protection circuit, which if damaged, may
cause the battery to generate heat, rupture or ignite.
Do not leave a battery on prolonged charge when not in use.
If a battery has leaking fluids, do not touch any fluids.
In case of eye contact with fluid, do not rub eyes. Immediately flush eyes
thoroughly with water for at least 15 minutes, lifting upper and lower lids, until no
evidence of the fluid remains. Seek medical attention.
1.1.4 Warnings related to safety of measurement functions
Insulation resistance (R iso, R iso all)
Insulation resistance measurement should only be performed on de-energized objects!
Do not touch the test object during the measurement or before it is fully discharged! Risk
of electric shock!
Continuity functions (R low, R low 4W, Continuity)
Continuity measurements should only be performed on de-energized objects!
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metrel MI 3155 - Eurotest XD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metrel MI 3155 - Eurotest XD in the language / languages: English as an attachment in your email.

The manual is 7.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Metrel MI 3155 - Eurotest XD

Metrel MI 3155 - Eurotest XD User Manual - German - 247 pages

Metrel MI 3155 - Eurotest XD User Manual - Dutch - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info