776244
9
Zoom out
Zoom in
Previous page
1/242
Next page
MI 3155 EurotestXD General description
8
1 General description
1.1 Warnings and notes
Read before use
1.1.1 Safety warnings
In order to reach high level of operator safety while carrying out various measurements using the
EurotestXD instrument, as well as to keep the test equipment undamaged, it is necessary to
consider the following general warnings:
Read this user manual carefully, otherwise the use of the instrument may be
dangerous for the operator, the instrument or for the equipment under test!
Consider warning markings on the instrument (see next chapter for more
information).
If the test equipment is used in a manner not specified in this user manual, the
protection provided by the equipment could be impaired!
Do not use the instrument or any of the accessories if any damage is noticed!
Regularly check the instrument and accessories for correct functioning to avoid
hazard that could occur from misleading results.
Regularly check the instrument and accessories for correct functioning to avoid
hazard that could occur from misleading results.
Consider all generally known precautions in order to avoid risk of electric shock
while dealing with hazardous voltages!
Always check for the presence of dangerous voltage on PE test terminal of
installation by touching the TEST key on the instrument or by any other method
before starting single test and Auto Sequence® measurements. Make sure that the
TEST key is grounded through human body resistance without any insulated
material between (gloves, shoes, insulated floors, pens,...). PE test could
otherwise be impaired and results of a single test or Auto Sequence® can mislead.
Even detected dangerous voltage on PE test terminal cannot prevent running of a
single test or Auto Sequence®. All such behaviour is regarded as misuse.
Operator of the instrument must stop the activity immediately and eliminate the
fault/connection problem before proceeding with any activity!
Use only standard or optional test accessories supplied by your distributor!
In case a fuse has blown follow the instructions in this manual in order to replace
it! Use only fuses that are specified!
Service, calibration or adjustment of instruments and accessories is only allowed
to be carried out by a competent authorized person!
Do not use the instrument in AC supply systems with voltages higher than 550
Va.c.
Consider that protection category of some accessories is lower than of the
instrument. Test tips and Tip commander have removable caps. If they are
removed the protection falls to CAT II. Check markings on accessories!
cap off, 18 mm tip: CAT II up to 1000 V
cap on, 4 mm tip: CAT II 1000 V / CAT III 600 V / CAT IV 300 V
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metrel MI 3155 - Eurotest XD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metrel MI 3155 - Eurotest XD in the language / languages: English as an attachment in your email.

The manual is 7.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Metrel MI 3155 - Eurotest XD

Metrel MI 3155 - Eurotest XD User Manual - German - 247 pages

Metrel MI 3155 - Eurotest XD User Manual - Dutch - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info