776242

Metrel MI 3102 BT - Eurotest XE Manual

94
Zoom out
Zoom in
Previous page
1/104
Next page
MI3002 MI3100 MI3102 IT supply systems
94
Displayed results:
ISC1 ..........First fault current between L1-PE,
ISC2 ..........First fault current between L2-PE.
Save displayed results for documentation purposes. Refer to chapter 6.1.
Saving results.
B.3.5 Insulation monitoring device testing (MI 3102 only)
How to check insulation monitoring device
Step 1 Select Insulation function with the function selector switch first. Use the ¿/À
keys to select IMD check function. The following menu is displayed:
Figure B.7: IMD check menu
Connect test cable to the EurotestXE instrument.
Step 2 Set the following limit value:
o Fault resistance (indicative)
o Calculated first fault current high limit value.
Step 3 Connect test cable to the item under test. Follow the connection diagram
shown in figure B.5 to check insulation monitor device. Use the Help function
if necessary.
Step 4 Check the displayed warnings and online voltage/terminal monitor before
starting the measurement. If OK, press the TEST key. Use the ½/¾ keys to
decrease indicative insulation resistance until insulation monitor device
alarms bad insulation. Indicative insulation resistance and calculated first fault
current between first live conductor (e.g. L1) and PE conductor are displayed.
After performing the measurement results with PASS/FAIL indication appear
on the display.
Figure B.8: First fault condition between L1 and PE
… 94 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metrel MI 3102 BT - Eurotest XE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metrel MI 3102 BT - Eurotest XE in the language / languages: English as an attachment in your email.

The manual is 1.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Metrel MI 3102 BT - Eurotest XE

Metrel MI 3102 BT - Eurotest XE User Manual - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info