572223
60
Zoom out
Zoom in
Previous page
1/64
Next page
MI 2092 Power Harmonics Analyser Section VII Modem data transfer
60
Note:
- Serial port baud rate is automatically set to 9600 Bauds (for GSM modem) and
cannot be set to any other rate.
- Take care that all devices (PC, both modems and instrument) are set to the same
baud rate.
3.2. Modem configuration at the PC side
The modem connected to the PC should be configured before use. The PC with
internal modem does not need any external extension. For external modem do the
following:
- Connect the modem to the unused COM port of the PC using RS232 interface
cable. The modem and PC should be switched off when connecting them together.
- Switch them on and wait until the PC finishes its initialization sequence.
- Insert PIN card in the case of using GSM modem.
- Connect telephone line to the modem in the case of using standard modem.
3.3. Modem configuration at the instrument side
The modem connected to the instrument should be configured before use. Use the
Power Link and do the following configuration procedure:
- Insert PIN card into modem (for GSM modem).
- Connect modem to the PC, run Power Link and click ’’Modem / Configure target
modem’’ (see the following figure).
- Disconnect the modem from the PC and connect it to the instrument with special
RS232 cable (see chapter 4 for connection diagram) , both must be in the power off
state (switched off).
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metrel MI 2092 Power Harmonics Analyser at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metrel MI 2092 Power Harmonics Analyser in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Metrel MI 2092 Power Harmonics Analyser

Metrel MI 2092 Power Harmonics Analyser User Manual - Dutch - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info