572226

Metrel MD 9225 Industrial TRMS AC-DC Current Clamp Meter Manual

7
Zoom out
Zoom in
Previous page
1/40
Next page
MD 9225 Clamp Meter Series Product Description
7
3 Product Description
This user's manual uses only representative model(s) for illustrations. Please refer
specification details for function availability to each model.
1) To reduce the risk of fire or electric
shock, do not expose this product to rain or
moisture. The meter is intended only for
indoor use.
To avoid electrical shock hazard, observe
the proper safety precautions when
working with voltages above 60 VDC or 30
VAC rms. These voltage levels pose a
potential shock hazard to the user.
Keep your hands/fingers behind the
hand/finger barriers (of the meter and the
test leads) that indicate the limits of safe
access of the hand-held part during
measurement. Inspect test leads,
connectors, and probes for damaged
insulation or exposed metal before using
the instrument. If any defects are found,
replace them immediately.
This Clamp-on meter is designed to apply
around or remove from uninsulated
hazardous live conductors. But still,
individual protective equipment must be
used if hazardous live parts in the
installation where measurement is to be
carried out could be accessible.
2) Hand/Finger Barrier to indicate the limits
of safe access of the meter during
measurement
3) Push-buttons for special functions &
features
4) Input Jack for all functions EXCEPT
non-invasive ACA & DCA current functions
5) Common (Ground reference) Input Jack
for all functions EXCEPT non-invasive
ACA & DCA current functions
6) Slide-switch Selector to turn the power
ON/OFF and Select a function
7) 3-3/4 digits 4000 counts LCD display
8) Jaw trigger for opening the clamp jaw
9) DCA direction for + polarity as well as
Jaw center Indicator, at where best ACA &
DCA accuracy is
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metrel MD 9225 Industrial TRMS AC-DC Current Clamp Meter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metrel MD 9225 Industrial TRMS AC-DC Current Clamp Meter in the language / languages: English, German as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info