625649

Metabo WEF 9-125 Quick Manual

19
Zoom out
Zoom in
Previous page
1/124
Next page
ENGLISH en
19
and electric equipment and its implementation
in national legal systems, used power tools must be
collected separately and returned for environmen-
tally compatible recycling.
Special instructions for cordless machines:
Battery packs must not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact with
water!
Before disposal, discharge the battery pack in the
power tool. Prevent the contacts from short-
circuiting (e. g. by protecting them with adhesive
tape).
Explanation of details on page 3. Subject to
changes serving technical progress.
U = Voltage of battery pack
D
max
= max. diameter of accessory
t
max,1
= Max. permitted thickness of clamping
shank on accessory when using
clamping nut (18)
t
max,2
= max. permitted thickness of clamping
shank on accessory when using
"Quick"clamping nut (2)
t
max,3
= Roughing wheel/cut-off wheel:
max. permissible thickness of the
accessory tool
M=Spindle thread
l = Length of the grinding spindle
n* = No-load speed (maximum speed)
P
1
= Nominal power input
P
2
= Power output
m = Weight with smallest battery pack/
weight without cord
Measured values determined in conformity with
EN 60745.
Machine in protection class II
~ Alternating current
Direct current
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Electromagnetic disturbances:
In individual cases, the speed may fluctuate tempo-
rarily if the machine is exposed to extreme external
electromagnetic disturbances or the electronic
restart protection may respond. In this case, switch
the machine off and on again.
Emission values
Using these values, you can estimate the
emissions from this power tool and compare these
with the values emitted by other power tools. The
actual values may be higher or lower, depending on
the particular application and the condition of the
tool or power tool. In estimating the values, you
should also include work breaks and periods of low
use. Based on the estimated emission values,
specify protective measures for the user - for
example, any organisational steps that must be put
in place.
Vibration total value
(vector sum of three directions)
determined in accordance with EN 60745:
a
h, SG
= Vibration emission value
(surface grinding)
a
h, DS
= Vibration emission value
(disc sanding)
K
h,SG/DS
= Uncertainty (vibration)
Typical A-effective perceived sound levels::
L
pA
=Sound pressure level
L
WA
=Acoustic power level
K
pA
, K
WA
= Uncertainty
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
14. Technical specifications
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo WEF 9-125 Quick at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo WEF 9-125 Quick in the language / languages: All languages as an attachment in your email.

The manual is 7,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info