585246

Metabo TPF6600SN Manual

12
Zoom out
Zoom in
Previous page
1/68
Next page
12
ENGLISH
BDanger! Risk of electric shock!
Do not touch the plug with wet hands! To un-
plug always pull on the plug, not the power
cable.
Connect only to an earthed outlet that is
properly installed, earthed and tested. Mains
voltage and fuse protection must correspond
to those stated in the 'Technical Specifica-
tions'.
Always lift and transport the pump by the
handle, never by the power cable or dis-
charge hose.
Extension cables must have sufficient con-
ductor cross sections. Unroll cable reels ful-
ly.
Do not buckle, squeeze, drag or drive over
power cable or extension cables; protect
from sharp edges, oil and heat.
Place extension cable so that it can not get
into the fluid to be pumped.
Always unplug before servicing the pump.
BRisk of electric shock from pump
faults!
Before each use check the equipment, espe-
cially the power and extension cables, power
plug and float switch for possible damage.
Risk of fatal electric shock!
Do not attempt to repair the pump yourself!
When repaired inexpertly there is a hazard of
liquid entering the electrical parts of the
pump.
A Caution!
To avoid water damage, e.g. flooded
rooms, caused by pump malfunctions or
defects:
provide for suitable safety measures such
as the following:
– alarm or
– collection tank with monitoring.
The manufacturer is not liable for any dam-
age caused by:
– improper use of the pump;
– overloading of the pump through conti-
nous operation;
– failure to operate and store the pump in a
frost-free environment;
– unauthorised modification of the pump (re-
pairs to electrical equipment may only be
carried out by qualified electricians!);
– use of spare parts which have not been
tested and approved by the manufacturer;
or
– use of unsuitable installation materials (fit-
tings, connection lines etc.).
Suitable installation materials:
– pressure-resistant (min. 10 bar)
– heat-resistant (min. 100°C).
4.1 Assembling the handle / lift-
ing eye
1. Bring the two halves of the handle (10) to-
gether as illustrated above.
Run the power supply cable (11) and float
switch cable (12) out the top.
2. Join the two halves of the handle (10). En-
sure that the guides on the two handle
parts engage.
3. Secure the handle with the four screws (9)
to the pump casing (13). Use the supplied
screws only.
4.2 Connecting the discharge line
4. Assembly and Installation
9
10
11
10
13
12
PS 18000 SN All other models
15
15
G 1"
1¼"
1½"
1"
G 1"
1¼"
16
16
14
14
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo TPF6600SN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo TPF6600SN in the language / languages: English, German, Dutch, Danish, French, Swedish as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info