658498

Metabo SBE 850-2 S Manual

14
Zoom out
Zoom in
Previous page
1/68
Next page
ENGLISHen
14
Vacuum or wash protective clothing. Do not blow,
beat or brush.
Illustrations are provided at the beginning of the
operating instructions.
Symbol explanation:
Normal drilling/Drill bit
Impact drilling
Movement direction
Driving screws/Screw
Slow
Fast
Fig. A
1 Thumb-wheel for gear selection
2 Additional handle/Additional handle with
vibration damping *
3Depth stop
4Geared chuck *
5 Futuro Plus keyless chuck *
6 Futuro Top keyless chuck *
7 Sliding switch (normal drilling/impact drilling)
8 Speed preselection wheel *
9 Setting wheel for impulse function *
10 Electronic signal indicator *
11 Rotation selector switch *
12 Lock button for continuous activation
13 Trigger
* depending on model
Before plugging in the device, check to see
that the rated mains voltage and mains
frequency, as specified on the rating label, match
your power supply.
Always install an RCD with a maximum trip
current of 30 mA upstream.
To guarantee secure purchase of the chuck:
After initial drilling (clockwise), use a screw-
driver to firmly tighten the safety screw inside the
drill chuck (if available/depending on the model).
THE SAFETY SCREW HAS A LEFT-HANDED
THREAD!
7.1 Fitting the additional handle (2)
Fig.
B
For safety reasons, always use the additional
handle supplied.
Tighten the additional handle firmly by turning it.
8.1 Setting depth stop
Fig. C
8.2 Setting direction of rotation, transporting
safety device (switch-on lock) Fig. D
Do not activate the rotation selector switch
(11) unless the motor has completely stopped.
8.3 Setting for normal drilling, impact drilling
Fig. E
Impact drilling and normal drilling only in a
clockwise direction.
8.4 Selecting gear
Fig. F
Change thumbwheel (1) only when the
machine is in the process of running down
(briefly switch it on and off).
8.5 Setting impulse function
Fig. G
= impulse function switched on constantly (to
facilitate tightening and releasing of screws
that are tight even when the screw heads are
damaged. To enable clean drilling without
centre punching in tiles, aluminium or other
materials).
8.6 Preselecting rotational speed
Fig. H
See the table for recommended rotational speeds
for drilling.
8.7 Switching On and Off
Switching on, rotational speed
Fig. A
: Press
the trigger (13).
Release the trigger to switch off.
Continuous operation
Fig. A
: With the trigger
(13) pressed, push in the locking button (12) and
release the trigger. Press and release the trigger
(13) again to switch off.
In continuous operation, the machine
continues running if it is forced out of your
hands. Therefore, always hold the machine with
both hands using the handles provided, stand in a
safe position and concentrate.
8.8 Tool change, Futuro Top keyless chuck
(6)
Fig. I
Clamp the tool by turning the sleeve firmly to its
stop.
8.9 Tool change, Futuro
Plus (5) keyless
chuck
Fig. J
The ratchet sound which can possibly be heard
after opening the drill chuck is functional and is
switched off by a reverse rotation of the sleeve.
If the chuck is very tightly closed:
Firmly grip the
chuck with an open-end spanner at the chuck head
and firmly turn the sleeve in the direction of the
arrow -1.
Clamping the tool
- Insert the tool -2- as far as possible.
- Using one hand, hold the retainer ring securely
(depending on fittings).
- Turn sleeve in direction -3- until the noticeable
mechanical resistance has been overcome.
5. Figures
6. Overview
7. Initial Operation
8. Use
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo SBE 850-2 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo SBE 850-2 S in the language / languages: All languages as an attachment in your email.

The manual is 12,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info