511033

Metabo SBE 85 Manual

13
Zoom out
Zoom in
Previous page
1/116
Next page
ENGLISH
13
ENG
socket or in case of a power cut. Not necessary
with VTC electronics (electronic restart protection).
Ensure that the spot where you wish to work is free
of
power cables, gas lines or water pipes
(e.g. using a metal detector).
Keep hands away from the rotating tool!
Remove chips and similar material only with the
machine at standstill.
Metabo S-automatic safety clutch.
When the safety clutch responds, switch off the
machine immediately!
Caution must be exercised when driving screws
into hard materials (driving screws with metric or
imperial threads into steel)! The screw head may
break or a high reverse torque may build up on the
handle.
Dust from material such as paint containing lead,
some wood species, minerals and metal may be
harmful. Contact with or inhalation of the dust may
cause allergic reactions and/or respiratory
diseases to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic
such as oak and beech dust especially in conjunc-
tion with additives for wood conditioning (chromate,
wood preservative). Material containing asbestos
must only be treated by specialists.
- Where the use of a dust extraction device is
possible it shall be used.
- The work place must be well ventilated.
- The use of a dust mask of filter class P2 is
recommended.
Follow national requirements for the materials you
want to work with.
Smaller workpieces must be secured such that
they are not carried along with the drill bit when
drilling (e.g. by clamping in a vice or on a work
bench with screw clamps).
See page 3 (please unfold).
1 Geared chuck *
2 Keyless chuck Futuro Plus *
3 Keyless chuck Futuro Top *
4Depth stop
5 Control knob for gear selection
6 Slide switch for drilling/impact drilling
7 Contact mode indicator *
8 Contact mode on/off switch button *
9 Ribbed knob for impulse mode preselection *
10 Electronic signal indicator *
11 Lock button
12 Speed preselection wheel *
13 Trigger
14 Selector switch for direction of rotation *
15 Drill bit storage *
16 Side handle/Side handle with rubber coating*
* depending on machine type
Metabo S-automatic safety clutch:
If the insertion tool jams or hooks, the power flow
to the engine will be restricted. Because of the high
power which then arises, always hold the machine
with both hands on the handles, stand safely, and
concentrate on your work.
Auto-stop carbon brushes:
If the brushes are completely worn, the machine
switches off automatically.
With VTC electronics: A LED warns before the
brushes are completely worn.
Restart protection with VTC electronics:
(SBE 1010 Plus)
The restart protection prevents an unintentional
starting of the machine when being plugged in
again and when power is restored after a power
failure.
Overload protection indicator with
VTC electronics:
(SBE 1010 Plus)
The overload protection indicator warns of an
impending overload.
Metabo impulse mode:
(SBE 85, SBE 850 Impuls)
For effortless turning-out seized screws, even with
damaged screw heads.
For exact centering, without the need for a centre
punching, in tiles, aluminium or other materials.
Electronic torque limiter:
(SBE 85, SBE 850 Impuls)
When driving small screws or tapping threads by
means of taps with a small diameter the torque can
be reduced to a value that suits the job to be
performed.
Metabo contact mode:
(SBE 850 Contact)
For intelligent drilling in walls with installed electric
or water lines. As soon as the inserted tool makes
contact with conductive, earthed material or live
supply cables, the machine switches off
immediately.
Before plugging in check to see that the
rated mains voltage and power frequency,
as stated on the name plate, match with your
power supply.
To ensure that the drill chuck is securely
fitted:
After initial drilling (clockwise), use a
screwdriver to firmly tighten the safety screw
5Overview
6 Special Product Features
7Start of Operation
17026951_0709 SB_Bauk.book Seite 13 Montag, 13. Juli 2009 1:54 13
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo SBE 85 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo SBE 85 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info