658487
14
Zoom out
Zoom in
Previous page
1/116
Next page
14
ENGLISH
ENG
inside the drill chuck (if applicable / model-
specific). Caution left-handed thread !
(see Section 8.13.)
7.1 Side handle installation
For safety reasons, always use the side
handle supplied.
Open the clamping ring by turning the side handle
(16) counter-clockwise. Place the side handle onto
the machine's collar. Insert the depth stop (4).
Tighten the side handle in the required angle
depending on the task at hand.
8.1 Depth stop setting
Loosen the side handle (16). Set depth stop (4) to
the desired drilling depth and retighten the side
handle.
8.2 Switching on/off
To start the machine, press the trigger (13).
The speed can be changed at the trigger
(not SB 660).
Due to the electronic soft start the machine
accelerates continuously up to the pre-selected
speed (SBE 1010 Plus, SBE 85, SBE 850 Impuls,
SBE 850 Contact).
For continuous operation the trigger can be locked
with the lock button (11). To stop the machine,
press the trigger again.
If switched on continuously, the machine
continues running if it is jerked out of your
hands. Therefore, always hold the machine
with both hands on the handles, stand safely,
and concentrate on your work.
8.3 Speed preselection
(not for SB 660)
Pre-select the max. speed with the preselection
wheel (12). See page 4 for recommended drilling
speeds.
8.4 Gear selection
Select the desired gear by turning the control
knob (5).
Change gears only with the machine coming to a
complete standstill (start and switch right off
again).
1. gear
(low speed, high torque)
e.g. for screwing twist drilling
2. gear
(high speed) e.g. for twist drilling,
impact drilling
8.5 Changing between twist drilling/impact
drilling
Select desired operating mode by shifting the slide
switch (6) as required.
Twist drilling
Impact drilling
Use high speed for impact drilling. Set control
knob (5) to .
Impact and twist drilling can be done only with a
clockwise direction of rotation.
8.6 Selection of direction of rotation
(not for SB 660)
Do not actuate the rotation selector
switch (14) unless the motor has
completely stopped.
Select direction of rotation:
R = clockwise
L = counter-clockwise
The drill chuck must be firmly screwed
onto the spindle and the safety screw
inside the drill chuck (if applicable / model-
specific) must be firmly tightened with a
screwdriver. (Caution, left-handed thread !) If
rotated counterclockwise (e.g. when screwing)
it could otherwise become loose.
8.7 Tool change with Futuro Top keyless
chuck (3)
Insert tool. Grip the retaining ring (a) firmly and,
with the other hand, turn the sleeve (b) against the
stop. To open the drill chuck grip the retaining ring
8Use
b
a
17026951_0709 SB_Bauk.book Seite 14 Montag, 13. Juli 2009 1:54 13
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo SBE 750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo SBE 750 in the language / languages: All languages as an attachment in your email.

The manual is 6,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info