658481
10
Zoom out
Zoom in
Previous page
1/64
Next page
10
ENGLISH
ENG
imperial threads into steel)! The screw head may
break or high reverse torques may build up.
High forces are released if the tool jams or
catches. Always hold the tool firmly, ensure you
have good footing and concentrate when working.
Secure small workpieces. Clamp in a vice for
example.
See page 3 (please unfold).
1
Slide switch for drilling/impact drilling
2 Keyless chuck Futuro Plus
3
Depth stop
4
Side handle
5 Rotation selector switch
6
Speed preselection wheel
7 Trigger
8 Locking button (continuous activation)
Before plugging in, check to see that the
rated mains voltage and mains
frequency, as stated on the rating label,
match with your power supply.
To guarantee secure purchase of the
chuck:
After initial drilling (clockwise), use a
screwdriver to firmly tighten the safety
screw inside the drill chuck. Caution left-
handed thread! (see Section 7.7)
6.1 Side handle installation
For safety reasons, always use the side
handle supplied.
Open the clamping ring by turning the side handle
(4) counter-clockwise. Place the side handle onto
the machine's collar. Insert the depth stop (3).
Tighten the side handle in the required angle
depending on the task at hand.
7.1 Depth stop setting
Loosen the side handle (4). Set depth stop (3) to
the desired drilling depth and retighten the side
handle.
7.2 Switching On and Off
To start the machine, press the trigger switch (7).
The speed can be changed using the trigger
switch.
For continuous operation the trigger switch can be
locked using the lock button (8). To stop the
machine, press the trigger switch again.
In continuous operation, the machine
continues running if it is forced out of
your hands. Therefore, always hold the
machine with both hands using the handles
provided, stand in a safe position and concen-
trate.
7.3 Speed preselection
Pre-select the max. speed with the preselection
wheel (6). See page 4 for recommended drilling
speeds.
7.4 Changing between twist drilling/impact
drilling
Select desired operating mode by shifting the slide
switch (1) as required.
Twist drilling
Impact drilling
Use high speed for impact drilling.
Impact and twist drilling can be done
only with a clockwise direction of
rotation.
7.5 Selection of direction of rotation
Do not activate the rotation selector
switch (5) unless the motor has
completely stopped.
Select direction of rotation:
R = Clockwise
L = Counter-clockwise
The drill chuck must be firmly screwed
onto the spindle and the safety screw
inside the drill chuck must be firmly
tightened with a screwdriver. (Caution, left-
handed thread!) If rotated counterclockwise
(e.g. when screwing) it could otherwise
become loose.
5 Overview
6 Commissioning
7Use
170 26 7390 - SBE 500.book Seite 10 Mittwoch, 14. Dezember 2005 8:45 08
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo SBE 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo SBE 500 in the language / languages: All languages as an attachment in your email.

The manual is 3,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info