Manual Metabo SB 18 LTX BL Impuls (page 12 of 68) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

594952

Zoom out

Zoom in

1/68

ENGLISH en

Impact drilling

Torque

Fig. A

1Keyless chuck

2 Additional handle

3 Slide switch (normal drilling, impact drilling) *

lide switch (1st/2nd gear)

5 Button (switch between 'max. torque' and function

set at setting wheel (13)) *

6 Rotation selector switch (rotation setting,

transport lock) - both sides of the machine

7Bit depot *

8Belt hook *

attery pack release button

10 Capacity indicator button

11 Capacity and signal indicator

Battery pack

13 Setting wheel (pulse function, torque control,

where applicable

'max. torque') *

14 LED lights

15 Trigger switch

*equipment-specific

7.1 Battery pack, capacity and signal display

Fig. B

Charge the battery pack before use.

If performance diminishes, recharge the battery

pack.

The ideal storage temperature is between 10 °C

and 30 °C.

7.2 Removing, replacing battery pack

Fig. C

7.3 Setting direction of rotation, transporting

safety device (switch-on lock) Fig. D

7.4 Selecting gear stage Fig. E

Only actuate slide switch (4) with the motor at

a standstill!

7.5 Setting for normal drilling, impact drilling

Fig. A

Press the slide switch (3).

7.6 Setting torque control, maximum torque,

pulse function

Do not work for long periods with pulse func-

tion switched on! (The motor can overheat.)

Machines with designation ...18 LTX

BL Quick...:

Fig. F

Turn the setting wheel (13) to switch on the pulse

function (button (5) flashes) or to switch on the

torque control (button (5) lights up continuously)

For maximum torque (drilling position), press the

button (5) (the button (5) is not illuminated). To acti-

vate the settings of setting wheel again: press the

button (5) again or turn the setting wheel.

Machines with designation ...18 LTX

Impuls/

Quick, ...18 LTX BL Impuls: Fig. G

Set the desired operating mode at the setting wheel

(13):

1...10 = torque control

Drill bit = maximum torque

Impuls = pulse function

7.7 Switching on/off, setting speed

Fig. A

Switching on, speed: Press the trigger (15). The

speed can be changed by pressing in the

trigger.

Switching off: release the trigger switch (15). Note:

The noise that the machine makes when it

switches off is due to the design (quick stop)

and has no influence on the function or the

service life of the machine.

7.8 Keyless chuck Fig. H

With a soft tool shank, retightening may be required

after a short period of operation.

Notes on

machines with the designation SB...

1. The ratchet sound which can possibly be heard

after opening the drill chuck is functional and is

switched off by a reverse rotation of the sleeve.

2. Clamping tool:

Turn sleeve (1) in direction "GRIP, ZU" until the

noticeable mechanical resistance has been

overcome.

Caution! The chuck is not yet fully tight-

ened! Keep turning the sleeve (it must "click"

when turning)) until it cannot be turned any

further - only now is the tool safely clamped.

Cleaning: From time to time, hold the machine

vertically with the keyless chuck facing

downwards and turn the sleeve fully in direction

"GRIP, ZU" and then turn fully in direction

"AUF, RELEASE". The dust collected falls from

the keyless chuck.

7.9 Unscrewing chuck Fig. I

Employ the same procedure when attaching the

chuck, except in reverse order.

7.10 Chuck with quick bit change system (for

BS 14.4 LTX Quick, BS 18 LTX Quick)

Fig. J

To remove: Push the interlock ring forward (a),

advance and pull off the chuck (b).

To mount: Push the interlock ring forward and

move the chuck as far as the limit stop on the drill

spindle.

6. Overview

7. Use

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metabo SB 18 LTX BL Impuls in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metabo SB 18 LTX BL Impuls Manual

Product: