600603
8
Zoom out
Zoom in
Previous page
1/52
Next page
ENGLISHen
8
2 Thumb-wheel for gear selection *
3Trigger switch
4 Locking button for continuous activation *
5 Speed preselection wheel *
6Handles
* depending on the model / features
Before plugging in, check that the rated mains
voltage and mains frequency, as stated on the
type plate match your power supply.
Always install an RCD with a maximum trip
current of 30 mA upstream.
7.1 Tool change
Attach the stirrer:
Screw the stirrer by hand into the spindle (1).
Remove the tool:
Hold the spindle (1) using an open-ended wrench
and fix the stirrer using a second open-ended
wrench.
7.2 Select the gear (depending on features)
Select the required gear by rotating the thumb
wheel (2).
Change speed when the machine is in the process
of running down (briefly switch it on and off).
I = 1. st gear (low speed, high torque)
II = 2. nd gear (high speed)
7.3 Presetting the speed (depending on
features)
Select the maximum speed using the preselection
wheel (5).
(Press in the trigger (3) to increase the rotational
speed.)
7.4 On/Off switch, modifying the speed
Switching on, speed: Press the trigger (3) .
Press in the trigger to increase the rotational speed.
To switch off release the trigger switch.
Continuous operation: With the trigger (3)
pressed, push in the locking button (4) and release
the trigger. Press and release the trigger (3) again to
switch off.
In continuous operation, the machine
continues running if it is forced out of your
hands. Therefore, always hold the machine with
both hands using the handles provided, stand
securely and concentrate.
Clean the machine regularly.
ENG
Use only genuine Metabo accessories.
Use only accessories which fulfil the requirements
and specifications listed in these operating
instructions.
Fit accessories securely. If the machine is operated
in a holder: Secure the machine well. Loss of control
can cause personal injury.
See www.metabo.com or the catalogue for a
complete range of accessories.
Repairs to electrical tools must ONLY be carried out
by qualified electricians!
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. See
www.metabo.com for addresses.
You can download a list of spare parts from
www.metabo.com.
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Only for EU countries: Never dispose of
power tools in your household waste! Used
power tools must be collected separately and
handed in for environmentally compatible recycling
in accordance with European Directive 2002/96/EC
on waste electrical and electronic equipment and its
implementation in national legal systems.
Explanatory notes on the specifications on page 3.
Changes due to technological progress reserved.
P
1
=Rated input
P
2
= Power output
n
0
= No-load speed
n
1
= On-load speed
G = Drill spindle thread
D
R
= maximum permitted agitator diameter
D = Collar diameter
m=Weight (without mains cable)
Measured values determined in conformity with
EN 60745.
Machine in protection class II
~ AC Power
6. Commissioning
7. Use
19
24
8. Cleaning
9. Accessories
10. Repairs
11. Environmental Protection
12. Technical Specifications
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo RWEV 1600-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo RWEV 1600-2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info