595081

Metabo PowerMaxx SLA Manual

6
Zoom out
Zoom in
Previous page
1/36
Next page
Original instructions
1. General safety instructions
ENGLISHen
6
WARNING – Reading the operating instruc-
tions will reduce the risk of injury.
WARNING Read all safety warnings and
instructions. Failure to follow all safety warn-
ings and instructions may result in electric shock,
fire and/or serious injury.
Keep all safety instructions and information for
fut
ure reference.
Always charge batteries in chargers recommended
by the manufacturer.
Chargers designed for a specific
type of battery may pose a fire hazard when used
together with other battery types.
You must always insert the correct batteries in the
lamp.
Using other batteries may cause injuries and pose
a fire hazard.
When not in use, keep batteries away from paper
clips, coins, keys, nails, screws or other small metal
objects that could bridge the contacts.
Short circuits
between battery contacts can cause burns or fires.
Fluid may escape if batteries are used inappropri-
ately. Avoid all contact with this fluid. In the event of
accidental skin contact, rinse the affected area thor-
oughly. If the fluid enters your eyes, seek immediate
medi
cal assistance.
Escaping battery fluid can cause
skin irritation or burns.
Do not operate the lamp in potentially explosive
environments containing flammable dust, fluids or
gases .
The lamp can generate sparks which may ignite
dust or vapours.
Avoid accidental operation. Make sure that the lamp
is switched off before connecting the battery and
before picking up or carrying the lamp.
Accidentally
pressing the switch on the device or connecting the
device to the power supply when already switched on
can lead to accidents.
Always switch off the lamp when not in use.
Never use electrical devices with a defective switch.
Electrical devices that can no longer be switched on or off
are dangerous and must be repaired immediately.
Remove the battery before adjusting, cleaning and
storing the device or changing accessories.
These
precautionary measures prevent accidental operation of
the lamp.
When not in use,
keep the lamp out of the reach of
children. Do not allow personnel to use the device
unless they are already familiar with it or have read
these instructions.
Electrical devices are dangerous
when used by inexperienced personnel.
Maintain the device carefully. Check that all moving
parts are functioning correctly and do not seize,
make sure that no parts are broken or damaged to
an extent where they affect the function of the lamp.
Have damaged parts repaired before using the
device.
Many accidents are caused by poorly main-
tained electrical tools.
Do not operate the lamp without a window, or with a
window that is damaged.
Use the lamp, accessories, etc. as described in
t
hese instructions. Take into consideration the
working conditions and tasks required.
Using elec-
trical devices for applications other than those intended
can lead to dangerous situations.
Always have your lamp repaired by qualified
personnel using genuine spare parts.
This will ensure
that the device functions safely.
Keep your lamp away from heat sources and fires.
Do not store your lamp in moist or wet ambient
conditions. Do not store in locations where temper-
atures may reach or exceed 40 °C.
Examples include
alcoves, motor vehicles or metal structures during the
summer.
Do not expose the lamp to rain or damp conditions.
Do not leave the lamp on while unattended.
The device is designed for use indoors.
Never use an incomplete lamp, or one on which an
u
nauthorised modification has been made. Do not
switch on the lamp if tool parts or guard devices are
missing or defective.
Ensure it is steady. Secure the lamp properly if it is
at
tached to a stand.
Protect battery packs from water and mois-
ture!
Do not expose battery packs to naked flame!
Do not use faulty or deformed battery packs!
Do not open battery packs!
Do not touch or short-circuit b
attery packs!
Slightly acidic, flammable fluid may leak from
defective li-ion battery packs!
If battery fluid leaks out and comes into contact
with your skin, rinse immediately with plenty of
water.
If battery fluid leaks out and comes into
contact with your eyes, wash them with clean water and
seek medical attention immediately.
Warning - general danger!
Battery packs must not be disposed of with regular
wa
ste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come
into contact with
water!
Do not direct the light beam into the eyes of
people or animals.
In accordance with IEC
/EN 62471 for "Photobio-
logical safety of lamps and lamp systems", these
lamps are in
the Exempt Group.

2. Overview
See image on the title page.
1 Window/outlet of LED beam
2 Lamp head
3 On/off switch
4 Battery pack release button
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo PowerMaxx SLA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo PowerMaxx SLA in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info