595102
10
Zoom out
Zoom in
Previous page
1/64
Next page
ENGLISHen
10
If battery fluid leaks out and comes into
contact with your skin, rinse immediately
with plenty of water. If battery fluid leaks out
and comes into contact with your eyes, wash them
with clean water and seek medical attention imme-
diately.
See page 2.
1 Saw blade tensioning device for jigsaw and
reciprocating saw blades
2 LED working light
3 Front handle
4 Switch-on lock: To lock the trigger (8) to prevent
the tool from switching on inadvertently.
5Rear handle
6 Battery pack release button
7Battery pack*
8Trigger
9 Battery indicator to check the battery's charge
level
10 Button for setting the guide
11 Guide
12 Saw blade
13 Battery pack with indicator for charge level and
signal display * (press the button and the LEDs
indicate the charge level. If one LED is flashing,
the battery pack is almost flat and must be
recharged).
* depending on equipment/not in scope of delivery
6.1
The machine's
multifunctional monitoring
system
If the machine switches off automatically, the
machine electronics have activated automatic
protection mode.
Causes and remedies:
1. Battery pack almost flat (the electronics
prevent the battery pack from discharging totally
and avoid irreparable damage).
If the battery pack is almost flat, it must be
recharged.
2. Long continuous overloading of the machine will
activate the temperature cut-out.
Leave the machine or battery pack to cool.
Note:
The machine will cool more quickly if you
operate it at idling speed.
3. If the current is too high (for example, if the
machine seizes continuously for long periods),
the machine switches off.
Switch off the machine at the trigger (8). Then
continue working as normal. Try to prevent the
machine from seizing.
6.2 Battery pack
Charge the battery pack before use. If performance
diminishes, recharge the battery pack.
The ideal storage temperature is between 10°C and
30°C.
To remove the battery pack: Press the battery
pack release button (6) and remove the battery (7)
pack.
To fit the battery pack: Slide in the battery pack
(7) until it engages .
6.3 Fitting and removing the saw blade
Before carrying out any work: Remove the
battery pack.
Do not touch the saw blade immediately
following operation of the tool, as it can be
extremely hot and can lead to skin burns.
Use jigsaw saw blades as a general rule.
1 Turn the clamping sleeve (1) in the direction of
the arrow and hold it.
2 Insert the saw blade (12) as far as the limit stop
or remove it.
3 Release the clamping sleeve (1) (the clamping
sleeve rotates back to its original position).
4 Check that the saw blade is securely seated.
Note when using reciprocating saw blades: Both
jigsaw and reciprocating saw blades can be used.
Use jigsaw saw blades as a general rule. When
inserting reciprocating saw blades, ensure that the
reciprocating saw blade is inserted in a vertical
position as far as the limit stop. Slowly turn the
clamping sleeve (1) back to its original position and
ensure that the reciprocating saw blade is fitting into
the recess.
Note: Should it occur that a saw blade has broken
off and it cannot be removed by hand from the saw
blade quick-clamping device, turn the clamping
sleeve (1) in the direction of the arrow and hold it.
Engage the tip of a saw blade in the broken section
and pull it out. A fine-toothed metal saw blade is
best suited for this task.
6.4 Setting the guide
The cutting depth can be limited by shifting the
guide (11) (e.g. when sawing in front of a wall).
Occasionally shift the guide (11) to achieve even
wear of the saw blade.
1 Press the button (10) and shift the guide (11) to
the desired position.
2 Release the button (10) and shift the guide until
it engages.
5. Overview
6. Use
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo POWERMAXX ASE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo POWERMAXX ASE in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info