ENGLISHen
8
Original Instructions
1.Declaration of Conformity
2.Specified Use
3.General Safety Instructions
4.Special Safety Instructions
5.Overview
6.Commission
7.Operation
8.Care And Maintenance
9.Repairs
10.Environmental Protection
11.Troubleshooting
12.Technical Specification
We, being solely responsible: Her
these compressors, identified by type and serial
number *1), meet all relevant requirements of
directives *2) and standards *3). issui
authority *4), measured LWA(M) / guaranteed
LWA(G) sound power level *5), technical
documentation for *6) - see page 4.
This tool is used for the
compressed air for pro
compressed air.
The use in the medical and food
refilling of oxygen tanks is not permitted.
Explosive, flamm
be aspirated. Operin p
rooms is not permitted.
Any other use does not comply
purpose. Unspecified use, modification of the
pump or use of parts that have not been tested
and approved by the manufacturer
unforeseeable damage!
Children, adoleand untrained persons
must not use the machine and th
compressed air
Operate the device only unter supervision.
WARNING – Reading the operating
instructions wil
General Safety Instructions
WARNING – Read all safety warnings and
instructions. Failure to follow all safety
warnings and instruc
shock, fire and/or
Save all safety warnings and information for
future refer Pass on your power
together with these documents
users must be
time.
3.1 Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate the device in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Tools cre
sparks which may ignite the dust or fumes.
c) Keep children and other pe
while operating the device.
3.2 Electrical safe
a) Tool plugs must match the outlet. Never
modify the plug in
adapter plugs with earthed (grou
Unmodified plugs and matching outlets will r
risk of electri
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Neve
for carrying, hanging or unplugging
Keep cord away from heat, oil, sharp edges or
moving parts. D amaged or entangl
increase the risk of electric shock.
e) When operating a power tool o
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
3.3 Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a tool. Do
not use a tool while you are tired or under the
influence of drugs, alcohol or medication. A
moment of inattention wh
may result in serious personal injury.
b) Us
wear eye prot Protective equipment such
as a dust mask, non-skid safety shoes,
hearing protecti
application of the tool, will reduce personal
injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying p
your finger on the switch or energising power tools
that have the switch on invites accidents.
d) Remove any adjusting key or wren
turning the power t A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables b
of the tool in unexpected sit
f) Wear appropriate clothing. Do not wear
loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts.
Loose clothes, jew
in moving p
h) Do not let familiarity gained from
use of tools
and ignore tool safety principles. A careless
action can cause severe injury within a frac
second.
3.4 Tool use and care
a) Do not force the power tool. Use the corre
tool for your application. The correct
the job better and safer at the ra
designed.
b) Do not use the tool if the switc
turn it on and off. Electrical devices that can no
longer be switched on or
must be repaired immediately
c) Disconnect the plug from the pow
and/or the battery pack from the tool befo
making any adjustments, changing
accessories, or storing tools. Such preventive
safety measures reduce the risk of starting the
power tool accidental
d) Store idle tool
Do not allow persons unfamiliar with the
device or these
device. Devices are dangerous when used by
inexperienced personnel.
e) Maintain power tools and accessories with
care. Check that the moving parts ar
functioning properly and do not jam, that
there is no breakage of parts or any other
condition that may affect the device's
operation. If damaged, have the
repaired before using. Many accidents are
caused by poorly mainta
g) Use the power tool, accessories, tool bits
etc. in accordance with these instructions
Take into account the working conditions and
the work to be perform Use of the power tool
for operations different from those intended could
result in a h
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles an
handling ant
situations.
3.5 Service
a) Have your device serviced by a qualified
repair person using only genuine
replacement parts. This wi
device functions safely.
3.6 Additional Safety Ins
– These operating instruction
people with bas
handling machin
here. If you have had no experience with
machines of this k
under the supervision of people with
experienc
– The manufacturer b
caused by non-comple with these operating
instructions.
Informatio
designated as shown below:
Danger!
Risk of personal injury
mental damage.
Risk of electric shock!
Risk of personal inju
shock.
Caution!
Risk of material damage.
The following resi
compressed air too
completely even with safety installations:
4.1 Danger of injury due to escaping
compressed air and parts, which
are carried along by compressed
air!
– Never direct compressed air on p
animals.
– Ensure that all compressed air
accessories used are designed for the wo
pressure or can be connected via a pressure
reducer.
– When loosening the qu
attention that the compressed air
the compre
Therefore get a firm grip of the end of the
compressed
– Ensure that all screwed connections are always
tightened properly.
– Do not attempt to repair the
professionals
compressors
compressed air
4.2 Risk of burns at the surfaces of the
parts bearing compressed air!
– Let the tool cool down prior to the servicing
work.
4.3 Risk of personal injury and
crushing by moving
– Do not operate the tool without installe
– Keep in mind that
automatically when the minimum pressure is
reached! – Ensure the tool is disconnected from
power before servicing.
– Ensure that when switching on (e.g. after
servicing)
the tool.
4.4 Hazard generated by insufficient
personal protection gear!
– Wear hearin
– Wear protective goggles.
– Wear a breathing mask for
generating dust or when har
vapours are generated.
– Wear suitable work
– Wear non-sl
Contents
1. Declaration of Conformity
2. Specified Use
3. General Safety Instructions
4. Special Safety Instructions
