595156
40
Zoom out
Zoom in
Previous page
1/76
Next page
40
A
A: When, as a result of overload, the motor speed drops
or the motor stops, the LED (1) lights up.
Allow machine to cool down whilst idling until LED
extinguishes again.
A: Si la vitesse baisse ou que le moteur s’arrête suite
à une surcharge, la diode (1) s’allume.
Laisser refroidir la machine en marche à vide,
jusqu’à ce que la diode s’éteigne.
A: Sinkt aufgrund von Überlastung die Drehzahl oder
kommt der Motor zum Stillstand, leuchtet die
LED (1).
Maschine im Leerlauf abkühlen lassen, bis die LED
wieder erlischt.
A: Daalt op grond van overbelasting het toerental of
komt de motor tot stilstand, dan brandt de LED (1).
Machine in nullast laten draaien totdat deze is
afgekoeld en de LED weer uitgaat.
A: Se, a seguito di un sovraccarico, diminuisce la
velocità, o se il motore si arresta, il led (1) s'illumina.
Far raffreddare l'apparecchio, lasciandolo girare a
vuoto finché il led si rispegne.
A: El LED (1) se enciende si la velocidad cae a causa
de sobrecarga o en caso de detenerse el motor.
Dejar a la máquina en marcha de inercia hasta que
se enfríe y hasta que el LED vuelva a apagarse.
A: Caso o número de rotações venha a baixar ou caso
o motor venha a parar devido a uma sobrecarga, o
LED (1) começa a arder.
Deixar a máquina arrefecer em marcha em vazia,
até o LED se apagar.
A: Minskas varvtalet eller stannar motorn pga
överbelastning lyser LED (1).
Maskinen ska kylas ned på tomgång tills LED
slocknar igen.
A: Kun kierrosluku laskee ylikuormituksen seurauksena
tai moottori pysähtyy, niin LED (1) palaa.
Anna koneen jäähtyä joutokäynnissä, kunnes LED
sammuu.
A: Synker omdreiningstallet eller stopper motoren på
grunn av overbelastning, lyser LED (1).
Maskinen avkjøles på tomgang inntil LED slukker.
A: Mindskes omdrejningstallet eller standser motoren
på grund af overbelastning, så begynder LED´en (1)
at lyse.
Lad maskinen afkøle i tomgang, indtil LED´en er
slukket.
A:W przypadku zmniejszenia prędkości obrotowej lub
zatrzymania silnika na skutek przeciążenia zapala
się dioda (1). Spowodować ochłodzenie frezarki,
zezwalając na pracę bez obciążenia do chwili
wygaszenia diody.
A:Ha túlterhelés folytán lecsökken a fordulatszám
vagy leáll a motor, az (1) LED világít.
Hagyja a gépet üresjáratban lehűlni, amíg a LED
újból ki nem alszik.
A:ταν λγω τησ υπερθέρµανσησ µειώνεται ο
αριθµσ στροφών ή σταµατά ο κινητήρασ, ανάβει
η δίοδοσ φωτοεκποµπήσ (LED) (1).
Αφήστε το µηχάνηµα να κρυώσει, έωσ του
σβήσει πάλι η δίοδοσ φωτοεκποµπήσ (LED).
1
OfE_1229_Signal_0112_Teil1.qxp:OfE_1229_Signal_0508_Teil1.qxp 27.02.2013 16:57 Uhr Se
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo OF E 1229 SIGNAL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo OF E 1229 SIGNAL in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info