Manual Metabo MT 18 LTX COMPACT (page 9 of 65) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

595096

Zoom out

Zoom in

1/65

ENGLISH en

substances: Ensure good ventilation of the

workplace and wear appropriate protective

equipment, such as respirators able to filter

microscopically small particles.

Observe the relevant guidelines for your material,

staff, application and place of application (e.g.

occupational health and safety regulations,

disposal).

Collect the generated particles at the source, avoid

deposits in the surrounding area.

Use only suitable accessories. In this way, fewer

particles enter the environment in an uncontrolled

manner.

Use a suitable extraction unit.

Reduce dust exposure with the following measures:

- Do not direct the escaping particles and the

exhaust air stream at yourself or nearby persons

or on dust deposits.

- Use an extraction unit and/or air purifiers.

- Ensure good ventilation of the workplace and

keep it clean using a vacuum cleaner. Sweeping

or blowing stirs up dust.

- Vacuum or wash protective clothing. Do not blow,

beat or brush.

See page 2.

1LED lights

2 Release lever

3 Slide switch

4Handle

5 Setting wheel for speed adjustment *

6 Battery pack

7 Battery pack release button

8 Extractor connection piece *

9 Dust extraction *

10 Adapter for FEIN

-tools *

11 Capacity indicator button *

12 Capacity and signal indicator *

13 Gear box flange

14 Tool holder

15 Accessories *

16 Spring pin

17 Sanding disc *

*depending on the features / model

Battery pack

Charge the battery pack (6) before use.

If performance diminishes, recharge the battery

pack.

The ideal storage temperature is between 10°C and

30°C.

Li-Ion battery packs "Li-Power" have a capacity and

signal indicator (12):

- Press the button (11), the LEDs indicate the

charge level.

- If one LED is flashing, the battery pack is almost

flat and must be recharged.

Removing and inserting the battery pack

Removal:

Press the battery pack release (7) button

and pull the battery pack (6) upwards

Inserting:

Slide in the battery pack (6) until it

engages.

7.1 Attach dust extraction (only when working

with triangular sanding plate)

See Fig. A, page 2

- Remove (15) tools.

- Place the dust extraction (9) onto the gear box

flange (13):

In section "B" the extraction can be moved freely.

When placing the extraction in position "A" it is

secured against twisting.

- Connect a suitable extraction unit with its

extraction hose to the inserted intake socket (8) .

7.2 Attaching the accessory

Prior to any conversion work: Remove battery

pack from machine.

Danger of injury due to the sharp accessories.

After stopping work, the tool may still be hot.

Danger of crushing when changing the tool. Wear

protective gloves.

Use only accessories with an OIS holder or a

compatible holder.

Use only sharp, undamaged saw blades. Do

not use accessories that are cracked or that

have changed their shape. Use an accessory that is

suitable for the material being sawn.

See Fig. A, page 2.

1. Open the release lever (2) until the stop.

2. Remove the spring pin (16) .

3. Place the accessory (15) in the desired position

onto the tool holder (14) . Ensure that it engages

in the cams of the tool holder (14) .

4. Insert the spring pin (16) until the stop.

5. Caution! The clamping lever (2) can snap back

and crush your fingers. Handle with care. Wear

protective gloves.

Close the release lever (2) until the stop and

lock. (The release lever has to be in contact with

the housing).

6. Check the accessories for firm hold.

Note:

For FEIN

-accessories place the supplied

adapter (10), as shown, on the tool holder (14) . See

figure, page 2.

7.3 Installation of sanding disc

Simple attachment and removal thanks to the

velcro-type fastening. Simply press on the sanding

disc (17) such that the holes in the sanding disc are

aligned with the support plate.

7.4 Switching On and Off

Switch on first, then guide the accessory

towards the workpiece.

5. Overview

6. Commissioning

7. Use

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metabo MT 18 LTX COMPACT in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metabo MT 18 LTX COMPACT Manual

Product: