600613

Metabo MLL 3-20 Manual

12
Zoom out
Zoom in
Previous page
1/96
Next page
12
en
Horizontal check
Checking the level of the horizontal laser line Fig. (C3)
2 parallel walls at a distance S of at least 5 m apart are needed to carry
out the horizontal check.
1.
Position the MLL 3-20 as close as possible in front of wall A on a horizontal
surface.
2. The MLL 3-20 is aligned with wall A using an exit aperture for the
vertical laser line.
3. Switch on the laser unit ( sliding switch (15) ).
4. Once automatic levelling has ended, mark the laser line cross projected
onto wall A. Marking 1.
5. Turn the MLL 3-20 by 180° and align with wall B using the same exit
aperture for the vertical laser line. The height adjustment must not
be changed.
6. Once automatic levelling has ended, mark the laser line cross projected
onto wall B. Marking 2.
7. Now reposition the laser unit so that it is directly in front of wall B. The
MLL 3-20 is aligned with wall B using the same exit aperture for the
vertical laser line.
8. Move the laser line cross by turning and adjusting the height until it
precisely coincides with point 2.
9. Turn the MLL 3-20 by 180° and align with wall Am using the same exit
aperture for the vertical laser line. The height adjustment must not
be changed.
10. Move the laser line cross by turning until it precisely coincides
with point 1.
11. Once automatic levelling has ended, mark the laser line cross
projected onto wall A. Marking 3.
12. Measure the vertical distance between points 1 and 3.
Perform this check for both vertical laser lines!
Clearance S to the wall: maximum permissible clearance:
05 m 3.0 mm
10 m 6.0 mm
15 m 9.0 mm
II.
I.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo MLL 3-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo MLL 3-20 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Metabo MLL 3-20

Metabo MLL 3-20 Additional guide - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info