600609

Metabo MFE 65 Manual

13
Zoom out
Zoom in
Previous page
1/100
Next page
ENGLISH en
13
The diamond cutting blades continue running after
the machine has been switched off.
Always wear protective goggles, dust mask, gloves,
ear protectors and sturdy shoes when working with
this tool.
Dust from material such as paint containing
lead, some wood species, minerals and
metal may be harmful. Contact with or
inhalation of the dust may cause allergic
reactions and/or respiratory diseases to the
operator or bystanders.
Use a suitable extraction unit!
Certain kinds of dust are classified as carcinogenic,
especially in conjunction with additives for wood
conditioning (chromate, wood preservative).
Material containing asbestos must only be treated
by specialists.
- To achieve a high level of dust collection, use a
suitable Metabo vacuum cleaner together with this
tool.
- The work place must be well ventilated.
- The use of a dust mask of filter class P2 is
recommended.
Follow national requirements for the materials you
want to work with.
Materials that generate dusts or vapours that may
be harmful to health (e.g. asbestos) must not be
processed.
When working in dusty conditions, ensure that
ventilation openings are not blocked. If it becomes
necessary to remove dust, first disconnect the
power tool from the mains supply (use non-metallic
objects) and avoid damaging internal components.
Damaged, eccentric or vibrating tools must not be
used.
Avoid damage to gas or water pipes, electrical
cables and load-bearing walls (static).
Connect a FI circuit-breaker with max. release
current (30 mA) upstream when using the machine
outdoors!
Pull the plug out of the socket before making any
adjustments, converting or servicing the machine.
A damaged or cracked additional handle must be
replaced. Never operate a machine with a defective
additional handle.
A damaged or cracked safety guard must be
replaced. Never operate a machine with a defective
safety guard.
Do not switch on the machine if tool parts or guard
devices are missing or defective.
An electronic error is present if the machine
accelerates very quickly to maximum speed when
switched on. Other safety-related electronic
functions are no longer available. Have the machine
repaired immediately (see
16.).
See page 2.
1 Lever for setting depth of cut
2 Scale for depth of cut
3 Aperture of extraction unit
4 Electronic signal indicator
5 Lock (to prevent the machine from being switched
on unintentionally, or for continuous operation)*
6
Trigger (
for switching on and off)
7 Button (to turn the main handle)*
8 Main handle
9 Additional handle
10 Retaining screw
11 Locking button
12 Clamping screw (for securing the safety guard)
13 Adjusting nut
14 Spacers
15 Cut-off wheel *
16 Cut-off wheel *
17 Back flange
18 2-hole spanner
19 Safety cover
* depending on equipment/not in scope of delivery
Before plugging in, check that the rated mains
voltage and mains frequency, as stated on the
rating label, match with your power supply.
To position the safety guard (if required):
- Release the clamping screw (12).
- Turn the safety guard until the closed section is
facing the operator.
- Tighten the clamping screw (12) firmly. Make sure
that the guard is seated securely - you should not
be able to turn the safety guard
(19).
6.1 Pivotable main handle
Only work with the main handle (8) engaged.
See illustration B on page 2.
-Push in the button (7).
- The main handle (8) can now be turned 90° to both
sides and can be engaged.
- Make sure that it is securely positioned: the main
handle
(8) must be engaged and it should not be
possible to move it.
See page 2.
Switch off the machine.
Disconnect the mains plug!
- Lie the tool on its side (the scale (2) for depth of cut
must be visible).
- Release the lever (1) for setting the depth of cut
and select the small depth.
-Press down the locking button (11) and turn the
spindle until you can feel the locking button lock in
place
(only when tool is stopped!).
- Remove and clean the back flange (17), spacers
(14) and adjusting nut (13).
- Fit the back flange (17) on the spindle. The flange
should not turn on the spindle when properly
attached.
- Fit the cut-off wheel (16) onto the back flange.
Make sure the direction of rotation is correct.
5. Overview
6. Initial Operation
7. Groove width
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo MFE 65 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo MFE 65 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info